On Tue, 18 Jun 2019 at 13:02, Kalle Valo <kvalo@xxxxxxxxxxxxxx> wrote: > > Ulf Hansson <ulf.hansson@xxxxxxxxxx> writes: > > > On Mon, 17 Jun 2019 at 19:57, Douglas Anderson <dianders@xxxxxxxxxxxx> wrote: > >> > >> This series attempts to deal better with the expected transmission > >> errors related to the idle states (handled by the Always-On-Subsystem > >> or AOS) on the SDIO-based WiFi on rk3288-veyron-minnie, > >> rk3288-veyron-speedy, and rk3288-veyron-mickey. > >> > >> Some details about those errors can be found in > >> <https://crbug.com/960222>, but to summarize it here: if we try to > >> send the wakeup command to the WiFi card at the same time it has > >> decided to wake up itself then it will behave badly on the SDIO bus. > >> This can cause timeouts or CRC errors. > >> > >> When I tested on 4.19 and 4.20 these CRC errors can be seen to cause > >> re-tuning. Since I am currently developing on 4.19 this was the > >> original problem I attempted to solve. > >> > >> On mainline it turns out that you don't see the retuning errors but > >> you see tons of spam about timeouts trying to wakeup from sleep. I > >> tracked down the commit that was causing that and have partially > >> reverted it here. I have no real knowledge about Broadcom WiFi, but > >> the commit that was causing problems sounds (from the descriptioin) to > >> be a hack commit penalizing all Broadcom WiFi users because of a bug > >> in a Cypress SD controller. I will let others comment if this is > >> truly the case and, if so, what the right solution should be. > >> > >> For v3 of this series I have added 2 patches to the end of the series > >> to address errors that would show up on systems with these same SDIO > >> WiFi cards when used on controllers that do periodic retuning. These > >> systems need an extra fix to prevent the retuning from happening when > >> the card is asleep. > >> > >> I believe v5 of this series is all ready to go assuming Kalle Valo is > >> good with it. I've added after-the-cut notes to patches awaiting his > >> Ack and have added other tags collected so far. > >> > >> Changes in v5: > >> - Add missing sdio_retune_crc_enable() in comments (Ulf). > >> - /s/reneable/re-enable (Ulf). > >> - Remove leftover prototypes: mmc_expect_errors_begin() / end() (Ulf). > >> - Rewording of "sleep command" in commit message (Arend). > >> > >> Changes in v4: > >> - Moved to SDIO API only (Adrian, Ulf). > >> - Renamed to make it less generic, now retune_crc_disable (Ulf). > >> - Function header makes it clear host must be claimed (Ulf). > >> - No more WARN_ON (Ulf). > >> - Adjust to API rename (Adrian, Ulf). > >> - Moved retune hold/release to SDIO API (Adrian). > >> - Adjust to API rename (Adrian). > >> > >> Changes in v3: > >> - Took out the spinlock since I believe this is all in one context. > >> - Expect errors for all of brcmf_sdio_kso_control() (Adrian). > >> - ("mmc: core: Export mmc_retune_hold_now() mmc_retune_release()") new for v3. > >> - ("brcmfmac: sdio: Don't tune while the card is off") new for v3. > >> > >> Changes in v2: > >> - A full revert, not just a partial one (Arend). ...with explicit Cc. > >> - Updated commit message to clarify based on discussion of v1. > >> > >> Douglas Anderson (5): > >> Revert "brcmfmac: disable command decode in sdio_aos" > >> mmc: core: API to temporarily disable retuning for SDIO CRC errors > >> brcmfmac: sdio: Disable auto-tuning around commands expected to fail > >> mmc: core: Add sdio_retune_hold_now() and sdio_retune_release() > >> brcmfmac: sdio: Don't tune while the card is off > >> > >> drivers/mmc/core/core.c | 5 +- > >> drivers/mmc/core/sdio_io.c | 77 +++++++++++++++++++ > >> .../broadcom/brcm80211/brcmfmac/sdio.c | 17 ++-- > >> include/linux/mmc/host.h | 1 + > >> include/linux/mmc/sdio_func.h | 6 ++ > >> 5 files changed, 99 insertions(+), 7 deletions(-) > >> > >> -- > >> 2.22.0.410.gd8fdbe21b5-goog > >> > > > > Applied for fixes, thanks! > > > > Some minor changes: > > 1) Dropped the a few "commit notes", that was more related to version > > and practical information about the series. > > 2) Dropped fixes tags for patch 2->5, but instead put a stable tag > > targeted for v4.18+. > > > > Awaiting an ack from Kalle before sending the PR to Linus. > > > > Kalle, perhaps you prefer to pick patch 1, as it could go separate. > > Then please tell - and/or if there is anything else you want me to > > change. > > TBH I haven't followed the thread (or patches) that closely :) So feel > free to take them and push them to Linus. > I take that as an ack and will add your tag for it, thanks! Kind regards Uffe
