> On Mon, 1 Apr 2019 at 19:43, Sowjanya Komatineni <skomatineni@xxxxxxxxxx> wrote: > > > > > > > > > > > > Default tap and trim values are incorrect for Tegra186 SDMMC4. > > > > > This patch fixes it. > > > > > > > > > > Tested-by: Jon Hunter <jonathanh@xxxxxxxxxx> > > > > > Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx> > > > > > > > > Is this a fix and/or for stable? > > > > > > > > In either case, I am leaving this for arm-soc. > > > > > > > > Kind regards > > > > Uffe > > > > > > > > > > Thanks Uffe. Yes this is applicable for stable. > > > > I don’t see any confirmation of this being applied by arm-soc. > > So thought to re-check if this is applied? > > Perhaps repost it to remind the soc maintainer to pick it up. > > Kind regards > Uffe > Reposted patch 5 and 10 in this series that are waiting for soc maintainers as fresh individual patches. Thanks Sowjanya > > > > > > > --- > > > > > arch/arm64/boot/dts/nvidia/tegra186.dtsi | 4 ++-- > > > > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > > > > > > > diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi > > > > > b/arch/arm64/boot/dts/nvidia/tegra186.dtsi > > > > > index 97aeb946ed5e..472f55fe9488 100644 > > > > > --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi > > > > > +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi > > > > > @@ -317,8 +317,8 @@ > > > > > nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>; > > > > > nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>; > > > > > nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>; > > > > > - nvidia,default-tap = <0x5>; > > > > > - nvidia,default-trim = <0x9>; > > > > > + nvidia,default-tap = <0x9>; > > > > > + nvidia,default-trim = <0x5>; > > > > > nvidia,dqs-trim = <63>; > > > > > mmc-hs400-1_8v; > > > > > status = "disabled"; > > > > > -- > > > > > 2.7.4 > > > > >
