> > > > Default tap and trim values are incorrect for Tegra186 SDMMC4. > > This patch fixes it. > > > > Tested-by: Jon Hunter <jonathanh@xxxxxxxxxx> > > Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx> > > Is this a fix and/or for stable? > > In either case, I am leaving this for arm-soc. > > Kind regards > Uffe > Thanks Uffe. Yes this is applicable for stable. > > --- > > arch/arm64/boot/dts/nvidia/tegra186.dtsi | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi > > b/arch/arm64/boot/dts/nvidia/tegra186.dtsi > > index 97aeb946ed5e..472f55fe9488 100644 > > --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi > > +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi > > @@ -317,8 +317,8 @@ > > nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>; > > nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>; > > nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>; > > - nvidia,default-tap = <0x5>; > > - nvidia,default-trim = <0x9>; > > + nvidia,default-tap = <0x9>; > > + nvidia,default-trim = <0x5>; > > nvidia,dqs-trim = <63>; > > mmc-hs400-1_8v; > > status = "disabled"; > > -- > > 2.7.4 > >
