On Fri, Jan 04, 2019 at 09:43:54AM -0800, Christoph Hellwig wrote: > > + u64 dma_mask = dma_get_mask(dev); > > This is not a driver API. I think what you want is > dma_get_required_mask to query the mask. But in that case > you still need to always actually set a mask in the driver as well. That's slightly different from what I want to do here. The purpose of this part of the patch is that when the SDHCI hardware supports only 32 bits of address space, then we want to prevent 64-bit addressing mode from being used because it isn't useful. So what we do want to check here is the DMA mask configured by the driver (or the default set by the bus, or wherever it came from). dma_get_required_mask() returns the DMA mask required to address all of system memory. That would perhaps be a useful additional check, but it's orthogonal to what I'm trying to do here. Is there something else appropriate that I could use to query the DMA mask set for a device? Thierry > Something like this patch: > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index a22e11a65658..36c61778d8f3 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -3500,6 +3500,13 @@ static int sdhci_set_dma_mask(struct sdhci_host *host) > struct device *dev = mmc_dev(mmc); > int ret = -EINVAL; > > + /* > + * Systems that can't address more than 32-bits do not need to use > + * 64-bit addressing mode, even if the device supports it. > + */ > + if (dma_get_required_mask(dev) <= DMA_BIT_MASK(32)) > + host->flags &= ~SDHCI_USE_64_BIT_DMA; > + > if (host->quirks2 & SDHCI_QUIRK2_BROKEN_64_BIT_DMA) > host->flags &= ~SDHCI_USE_64_BIT_DMA; >
Attachment:
signature.asc
Description: PGP signature
