There are two eSDHC controllers in lx2160a. This patch is to
enable eSDHC for RDB and QDS board.
Signed-off-by: Yinbo Zhu <yinbo.zhu@xxxxxxx>
---
Change in v2:
squash all lx2160a esdhc dts patch into the original patch
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 8 ++++++
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 15 ++++++++++++
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 25 +++++++++++++++++++++
3 files changed, 48 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index bc30173..b58b96c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -294,6 +294,14 @@
status = "okay";
};
+&esdhc0 {
+ status = "okay";
+};
+
+&esdhc1 {
+ status = "okay";
+};
+
&dspi0 {
dflash0: n25q128a {
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index 53b0e80..cbe8919 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -170,6 +170,21 @@
status = "okay";
};
+&esdhc0 {
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+ status = "okay";
+};
+
+&esdhc1 {
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ bus-width = <8>;
+ status = "okay";
+};
+
&fspi {
status = "okay";
nxp,fspi-has-second-chip;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index fa4a1f8..174544a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -356,6 +356,31 @@
little-endian;
};
+ esdhc0: esdhc@2140000 {
+ compatible = "fsl,esdhc";
+ reg = <0x0 0x2140000 0x0 0x10000>;
+ interrupts = <0 28 0x4>; /* Level high type */
+ clocks = <&clockgen 4 1>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ little-endian;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ esdhc1: esdhc@2150000 {
+ compatible = "fsl,esdhc";
+ reg = <0x0 0x2150000 0x0 0x10000>;
+ interrupts = <0 63 0x4>; /* Level high type */
+ clocks = <&clockgen 4 1>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ broken-cd;
+ little-endian;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
gpio0: gpio@2300000 {
compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
--
1.7.1
