[PATCH v5] mmc: sdhci-of-esdhc: modify the sd clock in of_match_node way

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: yinbo.zhu <yinbo.zhu@xxxxxxx>

Convert to use of_match_node method to fix up eSDHC clock for
ls1046a/ls1012a/p1010. Also add eSDHC clock fixup for ls1021a
according to its datasheet. The maxmum speed for ls1021a eSDHC
high speed mode is 46.5MHz.

Signed-off-by: Yinbo Zhu <yinbo.zhu@xxxxxxx>
---
Change in v5:
		Replace soc_device_match with of_match_node
		Add a condition that for avoiding esdhc->clk_fixup being NULL

 drivers/mmc/host/sdhci-of-esdhc.c |   85 +++++++++++++++++++++++++------------
 1 files changed, 57 insertions(+), 28 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 4ffa6b1..c9685c6 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -29,11 +29,56 @@
 #define VENDOR_V_22	0x12
 #define VENDOR_V_23	0x13
 
+#define MMC_TIMING_NUM (MMC_TIMING_MMC_HS400 + 1)
+
+struct esdhc_clk_fixup {
+	const unsigned int sd_dflt_max_clk;
+	const unsigned int max_clk[MMC_TIMING_NUM];
+};
+
+static const struct esdhc_clk_fixup ls1021a_esdhc_clk = {
+	.sd_dflt_max_clk = 25000000,
+	.max_clk[MMC_TIMING_MMC_HS] = 46500000,
+	.max_clk[MMC_TIMING_SD_HS] = 46500000,
+};
+
+static const struct esdhc_clk_fixup ls1046a_esdhc_clk = {
+	.sd_dflt_max_clk = 25000000,
+	.max_clk[MMC_TIMING_UHS_SDR104] = 167000000,
+	.max_clk[MMC_TIMING_MMC_HS200] = 167000000,
+};
+
+static const struct esdhc_clk_fixup ls1012a_esdhc_clk = {
+	.sd_dflt_max_clk = 25000000,
+	.max_clk[MMC_TIMING_UHS_SDR104] = 125000000,
+	.max_clk[MMC_TIMING_MMC_HS200] = 125000000,
+};
+
+static const struct esdhc_clk_fixup p1010_esdhc_clk = {
+	.sd_dflt_max_clk = 20000000,
+	.max_clk[MMC_TIMING_LEGACY] = 20000000,
+	.max_clk[MMC_TIMING_MMC_HS] = 42000000,
+	.max_clk[MMC_TIMING_SD_HS] = 40000000,
+};
+
+static const struct of_device_id sdhci_esdhc_of_match[] = {
+	{ .compatible = "fsl,ls1021a-esdhc", .data = &ls1021a_esdhc_clk},
+	{ .compatible = "fsl,ls1046a-esdhc", .data = &ls1046a_esdhc_clk},
+	{ .compatible = "fsl,ls1012a-esdhc", .data = &ls1012a_esdhc_clk},
+	{ .compatible = "fsl,p1010-esdhc",   .data = &p1010_esdhc_clk},
+	{ .compatible = "fsl,mpc8379-esdhc" },
+	{ .compatible = "fsl,mpc8536-esdhc" },
+	{ .compatible = "fsl,esdhc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
+
 struct sdhci_esdhc {
 	u8 vendor_ver;
 	u8 spec_ver;
 	bool quirk_incorrect_hostver;
 	unsigned int peripheral_clock;
+	const struct esdhc_clk_fixup *clk_fixup;
 };
 
 /**
@@ -492,6 +537,7 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 	int pre_div = 1;
 	int div = 1;
 	ktime_t timeout;
+	long fixup = 0;
 	u32 temp;
 
 	host->mmc->actual_clock = 0;
@@ -505,27 +551,14 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 	if (esdhc->vendor_ver < VENDOR_V_23)
 		pre_div = 2;
 
-	/*
-	 * Limit SD clock to 167MHz for ls1046a according to its datasheet
-	 */
-	if (clock > 167000000 &&
-	    of_find_compatible_node(NULL, NULL, "fsl,ls1046a-esdhc"))
-		clock = 167000000;
+	if (host->mmc->card && mmc_card_sd(host->mmc->card) &&
+		esdhc->clk_fixup && host->mmc->ios.timing == MMC_TIMING_LEGACY)
+		fixup = esdhc->clk_fixup->sd_dflt_max_clk;
+	else if (esdhc->clk_fixup)
+		fixup = esdhc->clk_fixup->max_clk[host->mmc->ios.timing];
 
-	/*
-	 * Limit SD clock to 125MHz for ls1012a according to its datasheet
-	 */
-	if (clock > 125000000 &&
-	    of_find_compatible_node(NULL, NULL, "fsl,ls1012a-esdhc"))
-		clock = 125000000;
-
-	/* Workaround to reduce the clock frequency for p1010 esdhc */
-	if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
-		if (clock > 20000000)
-			clock -= 5000000;
-		if (clock > 40000000)
-			clock -= 5000000;
-	}
+	if (fixup && clock > fixup)
+		clock = fixup;
 
 	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
 	temp &= ~(ESDHC_CLOCK_SDCLKEN | ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN |
@@ -783,6 +816,7 @@ static SIMPLE_DEV_PM_OPS(esdhc_of_dev_pm_ops,
 
 static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
 {
+	const struct of_device_id *match;
 	struct sdhci_pltfm_host *pltfm_host;
 	struct sdhci_esdhc *esdhc;
 	struct device_node *np;
@@ -802,6 +836,9 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
 	else
 		esdhc->quirk_incorrect_hostver = false;
 
+	match = of_match_node(sdhci_esdhc_of_match, pdev->dev.of_node);
+	if (match)
+		esdhc->clk_fixup = match->data;
 	np = pdev->dev.of_node;
 	clk = of_clk_get(np, 0);
 	if (!IS_ERR(clk)) {
@@ -901,14 +938,6 @@ static int sdhci_esdhc_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static const struct of_device_id sdhci_esdhc_of_match[] = {
-	{ .compatible = "fsl,mpc8379-esdhc" },
-	{ .compatible = "fsl,mpc8536-esdhc" },
-	{ .compatible = "fsl,esdhc" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
-
 static struct platform_driver sdhci_esdhc_driver = {
 	.driver = {
 		.name = "sdhci-esdhc",
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux