On Thu, Aug 03, 2017 at 05:54:00PM +0200, Simon Horman wrote:
> On Thu, Aug 03, 2017 at 09:43:51AM +0200, Simon Horman wrote:
> > On Wed, Aug 02, 2017 at 10:13:11PM +0200, Wolfram Sang wrote:
> > > Tests showed that SDHI driver problems have been solved and SDR104 works
> > > now reliably on both Salvator-X SD card slots, both with an R-Car H3
> > > (r8a7795 ES1.0) and R-Car M3 (r8a7796 ES 1.0). So, finally, enable it.
> > >
> > > Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
> > > ---
> > >
> > > Awesome, awesome! For the last two days, I did various tests with my boards and
> > > SD cards and SDR104 worked absolutely reliably :D Even the problematic card I
> > > had works flawlessly. I couldn't trigger the known failures anymore. Although I
> > > tried, I can't point to a single patch which "fixed" the issue. It is the
> > > constant work on dealing with smaller issues which makes SDR104 work at the end
> > > of the day. However, two patches are likely a bigger part of the cake:
> > >
> > > 43b0b361b01700 ("mmc: tmio: always get number of taps")
> > > -> Already upstream. This fixed retuning on card changes.
> > >
> > > 85b81aa16ec4ed ("mmc: tmio: fix CMD12 (STOP) handling")
> > > -> In mmc/next. This allows to handle tuning errors gracefully and to retune.
> > >
> > > With the freshly submitted Gen3 DMA patches, we also get nice transfer speeds :)
> > >
> > > This patch is based on renesas-drivers/master as of today. A branch for testing
> > > can be found here:
> > >
> > > git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/v8-sdr104
> > >
> > > All patches needed for reliable SDR104 are already upstream or in mmc/next. The
> > > above branch only adds another patch to enable DMA on Gen3. It is not strictly
> > > needed, but very nice to have. I think it would be cool to get both patches
> > > into v4.14.
> > >
> > > Looking forward to other testers. Simon, do you have some time for this?
> >
> > Yes, I should be able to run this through my - until now thought to be
> > broken - test case this week.
> >
> > It would be very nice to be able to get closure on this :)
>
> Awesome indeed!
>
> I have tested this using my test-case which is to remove and then
> re-insert a Samsung MB-SD32D/EU card. Slot SDHI3 was used although I expect
> that is not an important parameter.
>
> A bisection indicates the above test works since
> 85b81aa16ec4ed ("mmc: tmio: fix CMD12 (STOP) handling")
> which was included in v4.12 and highlighted by you above.
>
> Tested-by: Simon Horman <horms@xxxxxxxxxxxx>
>
> I will apply this for v4.14 in the near future.
Oops, I got a little excited there.
As it is an "RFT" I'm happy to apply it if you repost
it or otherwise indicate that is what you would like to happen.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
