Hi Ulf,
Very appreciated for your comment.
> On Thu, 2017-04-20 at 15:27 +0200, Ulf Hansson wrote:
> On 17 April 2017 at 10:09, <jiajie.hao@xxxxxxxxxxxx> wrote:
> > From: Jiajie Hao <jiajie.hao@xxxxxxxxxxxx>
> >
> > The host may issue an I/O abort by writing to the CCCR at any time
> > during I/O read operation via CMD52. And host may need suspend
> > transcation during write busy stage in SDIO suspend/resume scenario.
> > From other side, a card may accept CMD52 during data transfer phase.
> >
> > Previous implement would block issuing above command in busy stage.
> > It cause function driver can't implement as proper way and has no
> > opportunity to do some coverage in error case via I/O abort etc.
> >
> > We need bypass some necessary operation during busy check stage.
> >
> > Change-Id: Ib5a4599a2a98cbcf441b564f5f6fbb10c8a59e1b
>
> Please remove this.
OK.
> > Signed-off-by: Jiajie Hao <jiajie.hao@xxxxxxxxxxxx>
> > ---
> > drivers/mmc/core/core.c | 4 +++-
> > drivers/mmc/core/sdio_ops.h | 10 ++++++++++
> > 2 files changed, 13 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> > index 926e0fd..9c9a4bc 100644
> > --- a/drivers/mmc/core/core.c
> > +++ b/drivers/mmc/core/core.c
> > @@ -234,8 +234,10 @@ static void __mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
> > /*
> > * For sdio rw commands we must wait for card busy otherwise some
> > * sdio devices won't work properly.
> > + * And bypass I/O abort, reset and bus suspend operations.
> > */
> > - if (mmc_is_io_op(mrq->cmd->opcode) && host->ops->card_busy) {
> > + if (mmc_is_io_op(mrq->cmd->opcode) && host->ops->card_busy &&
> > + !mmc_is_io_bypass(mrq->cmd->opcode, mrq->cmd->arg)) {
>
> Instead of adding yet another function, let's extend the existing
> mmc_is_io_op() to cover this new cases as well.
>
> Moreover, to be reflect the purpose of the function, I suggest we
> rename it from mmc_is_io_op() to sdio_is_op_busy().
It's a good suggestion. I'll resend patch in v2 for review.
> > int tries = 500; /* Wait aprox 500ms at maximum */
> >
> > while (host->ops->card_busy(host) && --tries)
> > diff --git a/drivers/mmc/core/sdio_ops.h b/drivers/mmc/core/sdio_ops.h
> > index bed8a83..9896696 100644
> > --- a/drivers/mmc/core/sdio_ops.h
> > +++ b/drivers/mmc/core/sdio_ops.h
> > @@ -31,5 +31,15 @@ static inline bool mmc_is_io_op(u32 opcode)
> > return opcode == SD_IO_RW_DIRECT || opcode == SD_IO_RW_EXTENDED;
> > }
> >
> > +static inline bool mmc_is_io_bypass(u32 opcode, u32 arg)
> > +{
> > + u32 addr;
> > +
> > + addr = (arg >> 9) & 0x1FFFF;
> > +
> > + return ((opcode == SD_IO_RW_DIRECT) &&
> > + (addr == SDIO_CCCR_ABORT || addr == SDIO_CCCR_SUSPEND));
> > +}
> > +
> > #endif
> >
> > --
> > 1.7.9.5
> >
>
> Kind regards
> Uffe
Best regards
Jiajie
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
