Currently for DDR50 card, it need tuning in default. We meet tuning fail
issue for DDR50 card and some data CRC error when DDR50 sd card works.
This is because the default pad I/O drive strength can't make sure DDR50
card work stable. So increase the pad I/O drive strength for DDR50 card,
and use pins_100mhz.
Tested-and-reported-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # v4.4+
---
drivers/mmc/host/sdhci-esdhc-imx.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index cf666a0..abad67a 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -830,6 +830,7 @@ static int esdhc_change_pinstate(struct sdhci_host *host,
switch (uhs) {
case MMC_TIMING_UHS_SDR50:
+ case MMC_TIMING_UHS_DDR50:
pinctrl = imx_data->pins_100mhz;
break;
case MMC_TIMING_UHS_SDR104:
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
