Hi Russell,
On 2016/12/22 19:18, Russell King - ARM Linux wrote:
> On Tue, Dec 13, 2016 at 06:48:35PM +0100, Gregory CLEMENT wrote:
>> +Optional Properties:
>> +- mmc-card:
>> + mmc-card child node must be provided when current SDHC is for eMMC.
>> + Xenon SDHC often can support both SD and eMMC. This child node indicates that
>> + current SDHC is for eMMC card. Thus Xenon eMMC specific configuration and
>> + operations can be enabled prior to eMMC init sequence.
>> + Please refer to Documentation/devicetree/bindings/mmc/mmc-card.txt.
>> + This child node should not be set if current Xenon SDHC is for SD/SDIO.
>
> This looks like a typo - shouldn't it be "mmccard" and not "mmc-card"?
> Your examples below use "mmccard" as does the documentation you point
> towards.
>
Thanks a lot for the review.
I might mix up it with compatible "mmc-card".
I will change it to sub-node name in next version soon.
Thank you.
Best regards,
Hu Ziji
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
