On Tue, Dec 13, 2016 at 06:48:35PM +0100, Gregory CLEMENT wrote: > +Optional Properties: > +- mmc-card: > + mmc-card child node must be provided when current SDHC is for eMMC. > + Xenon SDHC often can support both SD and eMMC. This child node indicates that > + current SDHC is for eMMC card. Thus Xenon eMMC specific configuration and > + operations can be enabled prior to eMMC init sequence. > + Please refer to Documentation/devicetree/bindings/mmc/mmc-card.txt. > + This child node should not be set if current Xenon SDHC is for SD/SDIO. This looks like a typo - shouldn't it be "mmccard" and not "mmc-card"? Your examples below use "mmccard" as does the documentation you point towards. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
