On Tue, Dec 13, 2016 at 06:48:29PM +0100, Gregory CLEMENT wrote: > This the forth version of the series adding support for the SDHCI > Xenon controller. It can be currently found on the Armada 37xx and the > Armada 7K/8K but will be also used in more Marvell SoC (and not only > the mvebu ones actually). With the problems and niggles fixed, it seems to work here on my 8040 board (along with dma-coherent): sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on f06e0000.sdhci [f06e0000.sdhci] using ADMA 64-bit mmc0: new high speed MMC card at address 0001 mmcblk0: mmc0:0001 8GND3R 7.28 GiB mmc1: SDHCI controller on f2780000.sdhci [f2780000.sdhci] using ADMA 64-bit mmcblk0boot0: mmc0:0001 8GND3R partition 1 4.00 MiB mmcblk0boot1: mmc0:0001 8GND3R partition 2 4.00 MiB mmcblk0rpmb: mmc0:0001 8GND3R partition 3 512 KiB mmc1: new high speed SDHC card at address 0001 mmcblk1: mmc1:0001 00000 14.6 GiB mmcblk1: p1 p2 p3 Thanks. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
