Resend in plain text, sorry for noise. 2016-12-14 20:02 GMT+01:00 Marcin Wojtas <mw@xxxxxxxxxxxx>: > Hi Gregory, > > Checked a3700 and a7k (both interfaces, CP - one after changing to use eMMC > variant in DT). Everything works fine. You can add: > > Tested-by: Marcin Wojtas <mw@xxxxxxxxxxxx> > > Best regards, > Marcin > > 2016-12-13 18:48 GMT+01:00 Gregory CLEMENT > <gregory.clement@xxxxxxxxxxxxxxxxxx>: >> >> Hello, >> >> This the forth version of the series adding support for the SDHCI >> Xenon controller. It can be currently found on the Armada 37xx and the >> Armada 7K/8K but will be also used in more Marvell SoC (and not only >> the mvebu ones actually). >> >> v3 -> v4: >> For this version a few change have been done: >> - fixes 2 bug reported by kbuild-bot >> - remove extra of_node_put() >> - convert 0 in false for function returning boolean >> >> - add a device tree node for the sdhci controller present on the CP >> master for A7K/A8K. It also led to rename the sdhci0 node on AP to >> ap_sdhci0 to make a distinction with the one present on CP master. >> >> v2 -> v3 >> I think that now most (if not all) the remarks had been taking into >> account since the second version. According to Ziji Hu, here are the >> following changes: >> " Changes in V3: >> Adjust and improve Xenon DT bindings. Move some caps setting from driver >> into >> DT. Use mmc-card sub-node to represent eMMC type. >> Remove PHY Sampling Fixed Delay Line scan in lower speed mode. >> Improve Xenon probe and ->init_card() functions. >> Export sdhci_enable_sdio_irq() and implement own SDIO IRQ control. >> Split PHY patch into two smaller patches. >> Temporarily remove AXI clock before its implementation is improved." >> >> Besides this changes I also >> - Removed the sdhci-xenon-phy.h and moved its content in the >> shc-xenon-phy.c file. >> - Fixed the tuning-count usage >> - Managed the error case for clk_prepare_enable >> >> For the record the change from v1 was: >> " Changes in V2: >> rebase on v4.9-rc2. >> Re-write Xenon bindings. Ajust Xenon DT property naming. >> Add a new DT property to indicate eMMC card type, instead of using >> variable card_candidate. >> Clear quirks SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 in Xenon platform data >> Add support to HS400 retuning." >> >> Thanks, >> >> Gregory >> >> Gregory CLEMENT (3): >> arm64: dts: marvell: add eMMC support for Armada 37xx >> arm64: dts: marvell: add sdhci support for Armada 7K/8K >> arm64: configs: enable SDHCI driver for Xenon >> >> Hu Ziji (9): >> mmc: sdhci: Export sdhci_set_ios() from sdhci.c >> mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c >> mmc: sdhci: Export sdhci_execute_tuning() in sdhci.c >> mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c >> MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers >> dt: bindings: Add bindings for Marvell Xenon SD Host Controller >> mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality >> mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC. >> mmc: sdhci-xenon: Add SOC PHY PAD voltage control >> >> Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt | 197 ++- >> MAINTAINERS | 7 +- >> arch/arm64/boot/dts/marvell/armada-3720-db.dts | 17 +- >> arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 11 +- >> arch/arm64/boot/dts/marvell/armada-7040-db.dts | 14 +- >> arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 9 +- >> arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 10 +- >> arch/arm64/configs/defconfig | 1 +- >> drivers/mmc/host/Kconfig | 9 +- >> drivers/mmc/host/Makefile | 3 +- >> drivers/mmc/host/sdhci-xenon-phy.c | 908 >> +++++++- >> drivers/mmc/host/sdhci-xenon.c | 615 >> +++++- >> drivers/mmc/host/sdhci-xenon.h | 111 +- >> drivers/mmc/host/sdhci.c | 14 +- >> drivers/mmc/host/sdhci.h | 5 +- >> 15 files changed, 1926 insertions(+), 5 deletions(-) >> create mode 100644 >> Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt >> create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c >> create mode 100644 drivers/mmc/host/sdhci-xenon.c >> create mode 100644 drivers/mmc/host/sdhci-xenon.h >> >> base-commit: 9fe68cad6e74967b88d0c6aeca7d9cd6b6e91942 >> -- >> git-series 0.9.1 > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html