Re: [PATCH v3 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Gregory,

2016-12-12 20:16 GMT+01:00 Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>:
> On Mon, Dec 12, 2016 at 05:37:56PM +0100, Gregory CLEMENT wrote:
>> Hi Russell King,
>>
>>  On ven., déc. 09 2016, Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx> wrote:
>>
>> > On Fri, Dec 09, 2016 at 11:30:07AM +0100, Gregory CLEMENT wrote:
>> >> Also enable it on the Armada 7040 DB board
>> >>
>> >> Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
>> >
>> > Hi,
>> >
>> > Can this also be added to the cp110 on the 7k/8k SoCs as well, or does
>> > it rely on other unmerged support?
>>
>> I did not add this one because until now I had not the hardware setup
>> available to test it.
>>
>> But at least I can add the ressources in the device tree and now I can
>> test it partially.
>
> There's another option: add the DT resources in a separate patch, send
> it out for someone else to test.  When it comes back with a tested-by,
> then it can be included along with the rest of the patch set.

I work on A7040-DB with SD slot from AP and CP eMMC. If you have the
board, you can use eMMC module from A3720-DB and plug it to CON11.
Some small soldering may be required. Anyway, you can also just let me
test it:)

Best regards,
Marcin
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux