On Mon, Dec 12, 2016 at 05:37:56PM +0100, Gregory CLEMENT wrote: > Hi Russell King, > > On ven., déc. 09 2016, Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx> wrote: > > > On Fri, Dec 09, 2016 at 11:30:07AM +0100, Gregory CLEMENT wrote: > >> Also enable it on the Armada 7040 DB board > >> > >> Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx> > > > > Hi, > > > > Can this also be added to the cp110 on the 7k/8k SoCs as well, or does > > it rely on other unmerged support? > > I did not add this one because until now I had not the hardware setup > available to test it. > > But at least I can add the ressources in the device tree and now I can > test it partially. There's another option: add the DT resources in a separate patch, send it out for someone else to test. When it comes back with a tested-by, then it can be included along with the rest of the patch set. I'd send something, but I don't know what the GIC interrupt number would be without using the CP110's ICU (which isn't supported in mainline yet.) I've already tested your previous patch set (along with ICU support + needed DT bits) on the SR Macchiatobin board... it seems to work fine. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
