Hi Andrea,
Some minor remarks.
On 11/08/2016 02:43 PM, Andrea Merello wrote:
Signed-off-by: Andrea Merello <andrea.merello@xxxxxxxxx>
---
arch/arm/boot/dts/stm32f429.dtsi | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 336ee4f..961bc0c 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -313,6 +313,37 @@
};
};
+ sdio_pins:sdio_pins@0 {
Add a space after ":"
+ pins {
+ pinmux = <STM32F429_PC8_FUNC_SDIO_D0>,
+ <STM32F429_PC9_FUNC_SDIO_D1>,
+ <STM32F429_PC10_FUNC_SDIO_D2>,
+ <STM32F429_PC11_FUNC_SDIO_D3>,
+ <STM32F429_PC12_FUNC_SDIO_CK>,
+ <STM32F429_PD2_FUNC_SDIO_CMD>;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ sdio_pins_od:sdio_pins_od@0 {
same
+ pins {
+ pinmux = <STM32F429_PC8_FUNC_SDIO_D0>,
+ <STM32F429_PC9_FUNC_SDIO_D1>,
+ <STM32F429_PC10_FUNC_SDIO_D2>,
+ <STM32F429_PC11_FUNC_SDIO_D3>,
+ <STM32F429_PC12_FUNC_SDIO_CK>;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+
+ pins_od {
+ pinmux = <STM32F429_PD2_FUNC_SDIO_CMD>;
+ drive-open-drain;
+ slew-rate = <2>;
+ };
Why don't use "pins1" and "pins2" instead of "pins" and "pins_od" like
it is done for usart1?
regards
Alex
+ };
+
ethernet0_mii: mii@0 {
pins {
pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
