On 10/13/2016 03:40 AM, Zach Brown wrote: > Certain board configurations can make highspeed malfuction due to timing > issues. In these cases a way is needed to force the controller and card > into standard speed even if they otherwise appear to be capable of > highspeed. I'm not sure "broken-hishspeed" property is relevant to only sdhci driver? otherwise on card side..? Subject looks like only sdhci driver..And your RFC patch should be supported only SDHCI driver. But your [patch 1/2] can cause the confusing in future..because there are just comment as "controller". Then developer who refer to mmc.txt will add the property "broken-highspeed". I'm not sure what is correct way..but to prevent confusing..you mentioned only "sdhci" driver or supporting other controller. Best Regards, Jaehoon Chung > > The broken-highspeed property will let the sdhci driver know that > highspeed will not work. > > Signed-off-by: Zach Brown <zach.brown@xxxxxx> > --- > Documentation/devicetree/bindings/mmc/mmc.txt | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt > index 8a37782..a2b298c 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc.txt > +++ b/Documentation/devicetree/bindings/mmc/mmc.txt > @@ -52,6 +52,8 @@ Optional properties: > - no-sdio: controller is limited to send sdio cmd during initialization > - no-sd: controller is limited to send sd cmd during initialization > - no-mmc: controller is limited to send mmc cmd during initialization > +- broken-highspeed: Highspeed is broken, even if the controller and card > + themselves claim they support highspeed. > > *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line > polarity properties, we have to fix the meaning of the "normal" and "inverted" > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
