Some board configurations can not support sd highspeed mode due to the distance
between the card slot and the controller. The card and controller report that
they are capable of highspeed however, so we need a mechanism for specifying
that the setup is incapable of supporting highspeed mode.
The first patch adds documentation about a new devicetree property
sd-broken-highspeed.
The second patch keeps the sd controller and card from going into highspeed
mode when the property is set.
v2:
* changed sd-broken-highspeed to broken-highspeed
* Removed new quirk, instead read of property when would've checked quirk
Zach Brown (2):
sdhci: Add device tree property broken-highspeed
sdhci: Prevent SD from doing high-speed timing when broken-highspeed
property is set
Documentation/devicetree/bindings/mmc/mmc.txt | 2 ++
drivers/mmc/host/sdhci.c | 4 +++-
2 files changed, 5 insertions(+), 1 deletion(-)
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
