+dtc list
On Thu, Aug 4, 2016 at 5:58 PM, Kevin Hilman <khilman@xxxxxxxxxxxx> wrote:
> Hi Rob,
>
> Rob Herring <robh@xxxxxxxxxx> writes:
>
>> On Wed, Aug 03, 2016 at 04:18:42PM -0700, Kevin Hilman wrote:
>>> Add binding and basic support for the SD/eMMC controller on Amlogic
>>> S905/GXBB devices.
>>>
>>> Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxx>
>
> [...]
>
>>> + mmc_iv: gpio-regulator {
>>> + compatible = "regulator-gpio";
>>> +
>>> + regulator-name = "mmc-gpio-supply";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <3300000>;
>>> +
>>> + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
>>> + gpio-states = <0 1>;
>>> +
>>> + /*
>>> + * Based on ODROID-C2 schematics:
>>> + * signal name: IO_TF_3V3N_1V8, GPIOAO bit 3
>>> + */
>>> + states = <3300000 0
>>> + 1800000 1>;
>>
>> There are multiple things wrong in this node based on the regulator-gpio
>> documentation.
>
> I see I got the property name wrong, and the number of elements wrong,
> and this fixes those issues:
>
> - gpio-states = <0 1>;
> + gpios-states = <0>;
>
> By "multiple", did you mean more than those 2? If so, I'm not seeing
> what else is wrong.
I was thinking it needed an enable-gpio property, but now I see that
is separate from "gpios".
> [...]
>
>>> + mmc_iv: gpio-regulator {
>>> + compatible = "regulator-gpio";
>>> +
>>> + regulator-name = "mmc-gpio-supply";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <3300000>;
>>> +
>>> + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
>>> + gpio-states = <0 1>;
>>> +
>>> + /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
>>> + states = <1800000 0
>>> + 3300000 1>;
>>> + };
>>> +
>>> + vddio_boot: regulator {
>> [...]
>>> + vcc_3v3: regulator {
>>
>> This won't even compile as you have the same node name twice.
>
> Oops, it's wrong indeed, but in fact, it does compile, otherwise I
> would've caught that.. Even if I remove the labels, it still compiles.
> Interesting.
Humm, news to me. I will have to do some testing unless the dtc folks
have any insight.
Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
