Re: [PATCH v3 09/12] EXAMPLE CODE: usb: port: Parse pwrseq phandle from Device Tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Peter Chen (2016-06-01 05:05:20)
> On Wed, Jun 01, 2016 at 01:57:23AM -0700, Stephen Boyd wrote:
> > Quoting Krzysztof Kozlowski (2016-06-01 01:02:18)
> > > Parse usb-pwrseq property from Device Tree to get the phandle to pwrseq
> > > device.  The pwrseq device will be used by USB hub to cycle the power
> > > before activating ports.
> > > 
> > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> > 
> > Drive by review comment.
> > 
> > I was hoping this would help me with a problem I'm having where I have a
> > hub (smsc4604) that needs to be taken out of reset before my HSIC
> > controller sends a USB reset to it, but it seems this is more about
> > doing some sort of power on sequence after enumeration?
> > 
> 
> No, you may need to do reset before enumeration, the general purpose of
> reset is eliminate unstable hardware state, and let the controller find
> the device.
> 
> Try to do it at bootloader to see if it works for you.
> 

Sorry the bootloader doesn't do this so that doesn't work for me.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux