[PATCH RESEND] mmc: core: Enable tuning according to the actual timing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Carlo Caione <carlo@xxxxxxxxxxxx>

While in sdhci_execute_tuning() the choice whether or not to enable the
tuning is done on the actual timing, in the mmc_sdio_init_uhs_card() the
check is done on the capability of the card.

This difference is causing some issues with some SDIO cards in DDR50
mode where the CDM19 is wrongly issued.

With this patch we modify the check in both
mmc_(sd|sdio)_init_uhs_card() functions to take the proper decision
only according to the actual timing specification.

Signed-off-by: Carlo Caione <carlo@xxxxxxxxxxxx>
---

Hi Ulf,
as it turns out the panic I was seeing wasn't related to this patch. I had a
discussion with Hante Meuleman and apparently they fixed the problem I was
seeing with the patch "brcmfmac: Fix double free on exception at module load."
to be included in 4.5, so I'm submitting again this patch for your
consideration.

Cheers,

---
 drivers/mmc/core/sd.c   | 8 ++++----
 drivers/mmc/core/sdio.c | 4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 141eaa9..967535d 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -626,9 +626,9 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
 	 * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
 	 */
 	if (!mmc_host_is_spi(card->host) &&
-		(card->sd_bus_speed == UHS_SDR50_BUS_SPEED ||
-		 card->sd_bus_speed == UHS_DDR50_BUS_SPEED ||
-		 card->sd_bus_speed == UHS_SDR104_BUS_SPEED)) {
+		(card->host->ios.timing == MMC_TIMING_UHS_SDR50 ||
+		 card->host->ios.timing == MMC_TIMING_UHS_DDR50 ||
+		 card->host->ios.timing == MMC_TIMING_UHS_SDR104)) {
 		err = mmc_execute_tuning(card);
 
 		/*
@@ -638,7 +638,7 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
 		 * difference between v3.00 and 3.01 spec means that CMD19
 		 * tuning is also available for DDR50 mode.
 		 */
-		if (err && card->sd_bus_speed == UHS_DDR50_BUS_SPEED) {
+		if (err && card->host->ios.timing == MMC_TIMING_UHS_DDR50) {
 			pr_warn("%s: ddr50 tuning failed\n",
 				mmc_hostname(card->host));
 			err = 0;
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 16d838e..0444773 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -535,8 +535,8 @@ static int mmc_sdio_init_uhs_card(struct mmc_card *card)
 	 * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
 	 */
 	if (!mmc_host_is_spi(card->host) &&
-	    ((card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR50) ||
-	     (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)))
+	    ((card->host->ios.timing == MMC_TIMING_UHS_SDR50) ||
+	      (card->host->ios.timing == MMC_TIMING_UHS_SDR104)))
 		err = mmc_execute_tuning(card);
 out:
 	return err;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux