In case PXA1928 family of devices, there is device/controller specific
configuration to control voltage/power on the IO pins.
This patch implements and enables the sdhci_ops->voltage_switch()
callback api.
Note that IO pad register addresses are fetched as a memory resource.
For example, in case of PXA1928 and family of devices, the DT property
would look something like,
sdh1: sdh@d4280000 {
compatible = "mrvl,pxav3-mmc";
reg-names = "sdhci", "io-pwr", "io-pwr-lock-unlock";
reg = <0xd4280000 0x120>,
<0xd401e81c 4>,
<0xd4015068 8>;
...
};
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
---
drivers/mmc/host/sdhci-pxav3.c | 59 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 5d26fe0..cebb2f9 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -63,11 +63,18 @@
#define IO_PWR_AKEY_ASSAR 0xeb10
#define IO_PWR_MMC1_PAD_1V8 BIT(2)
+/* IO Power control */
+#define IO_PWR_AKEY_ASFAR 0xbaba
+#define IO_PWR_AKEY_ASSAR 0xeb10
+#define IO_PWR_MMC1_PAD_1V8 BIT(2)
+
struct sdhci_pxa {
struct clk *clk_core;
struct clk *clk_io;
u8 power_mode;
void __iomem *sdio3_conf_reg;
+ void __iomem *io_pwr_reg;
+ void __iomem *io_pwr_lock_reg;
};
/*
@@ -307,6 +314,38 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
__func__, uhs, ctrl_2);
}
+static void pxav3_voltage_switch(struct sdhci_host *host,
+ u8 signal_voltage)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_pxa *pxa = pltfm_host->priv;
+ unsigned int val;
+
+ if (!pxa->io_pwr_reg || !pxa->io_pwr_lock_reg)
+ return;
+
+ /* Lock register is 64 bit: First & Second access register */
+ writel(IO_PWR_AKEY_ASFAR, pxa->io_pwr_lock_reg);
+ writel(IO_PWR_AKEY_ASSAR, pxa->io_pwr_lock_reg + 4);
+ val = readl(pxa->io_pwr_reg);
+
+ switch (signal_voltage) {
+ case MMC_SIGNAL_VOLTAGE_180:
+ case MMC_SIGNAL_VOLTAGE_120:
+ val |= IO_PWR_MMC1_PAD_1V8;
+ break;
+ case MMC_SIGNAL_VOLTAGE_330:
+ default:
+ val &= ~IO_PWR_MMC1_PAD_1V8;
+ break;
+ }
+
+ writel(IO_PWR_AKEY_ASFAR, pxa->io_pwr_lock_reg);
+ writel(IO_PWR_AKEY_ASSAR, pxa->io_pwr_lock_reg + 4);
+
+ writel(val, pxa->io_pwr_reg);
+}
+
static const struct sdhci_ops pxav3_sdhci_ops = {
.set_clock = sdhci_set_clock,
.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
@@ -314,6 +353,7 @@ static const struct sdhci_ops pxav3_sdhci_ops = {
.set_bus_width = sdhci_set_bus_width,
.reset = pxav3_reset,
.set_uhs_signaling = pxav3_set_uhs_signaling,
+ .voltage_switch = pxav3_voltage_switch,
};
static struct sdhci_pltfm_data sdhci_pxav3_pdata = {
@@ -368,6 +408,7 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
struct sdhci_host *host = NULL;
struct sdhci_pxa *pxa = NULL;
const struct of_device_id *match;
+ struct resource *res;
int ret;
pxa = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_pxa), GFP_KERNEL);
@@ -408,6 +449,24 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
goto err_mbus_win;
}
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "io-pwr-conf");
+ if (res) {
+ pxa->io_pwr_reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pxa->io_pwr_reg)) {
+ ret = PTR_ERR(pxa->io_pwr_reg);
+ goto err_mbus_win;
+ }
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "io-pwr-lock-unlock");
+ if (res) {
+ pxa->io_pwr_lock_reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pxa->io_pwr_lock_reg)) {
+ ret = PTR_ERR(pxa->io_pwr_lock_reg);
+ goto err_mbus_win;
+ }
+ }
+
match = of_match_device(of_match_ptr(sdhci_pxav3_of_match), &pdev->dev);
if (match) {
ret = mmc_of_parse(host->mmc);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
