In order to do particular voltage specific configuration in
sdhci_ops->voltage_switch() callback function, we need to
pass respective voltage value as well.
So this patch series pass signal voltage to the controller
specific ->voltage_switch() callback.
Adds controller specific configuration for other voltages as well,
and add implementation for ->voltage_switch to pxav3 driver.
Note:
Currently ->voltage_switch() callback is only supported
in f_sdh30 driver. And I am not sure on the dependency of execution
sequence for that device. I could have moved ->voltage_switch() call
at one common place (above/below), but was not quite sure about it.
So, replicated/duplicated the call for other voltages.
Vaibhav Hiremath (3):
mmc: sdhci: pass signal_voltage as an argument to voltage_switch
callback
mmc: sdhci: add host_ops->voltage_switch callback for all other
voltages
mmc: sdhci-pxav3: Add ->voltage_switch callback support
drivers/mmc/host/sdhci-pxav3.c | 59 ++++++++++++++++++++++++++++++++++++++++
drivers/mmc/host/sdhci.c | 10 ++++++-
drivers/mmc/host/sdhci.h | 2 +-
drivers/mmc/host/sdhci_f_sdh30.c | 3 +-
4 files changed, 71 insertions(+), 3 deletions(-)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
