Hi, On Thursday 06 August 2015 12:18 PM, Tony Lindgren wrote: > * Kishon Vijay Abraham I <kishon@xxxxxx> [150805 08:03]: >> Hi, >> >> On Wednesday 05 August 2015 04:13 PM, Tony Lindgren wrote: >>> * Kishon Vijay Abraham I <kishon@xxxxxx> [150730 00:49]: >>>> Patch series implements voltage switching and tuning for omap_hsmmc >>>> driver. >>>> >>>> Did basic read/write test in J6, J6 Eco, Beagle-x15, AM437x EVM, >>>> Beaglebone black, OMAP5 uEVM and OMAP4 PANDA. >>> >>> Your tests are missing omap3? >> >> I don't have one at my disposal :-( I'll try to find one and add omap3 tests. > > Great :) Beagle xm is a good one to test the USB PHY stuff on > and also MMC. Having USB cable connected or EHCI loaded blocks the PM > though, so NFSroot is not very usable for testing on it. I found a beagle xm. So I should be able to get back to this early next week. Thanks Kishon > > If you want to test PM over NFSroot, boards with the smsc911x known > to work with PM are at least omap3-evm-37xx.dts and > logicpd-torpedo-37xx-devkit.dts. Since you tinker with the USB PHYs, > torpedo has MUSB working the same way as the beagle boards, EVM I > think can be modified that way but by default has diffent PHY. > > Also overo tobi boards work with PM but only for retntion idle and > not off idle, and map3-sbc-t3517.dts probably can be made to work > with PM but I have mine as a gateway and have not been able to test > with it. > > Probably also zoom3 boards with later processor boards can be made > to work, the LDP has early omap34xx variants and can't be made to > work reliably. > > I don't have omap3-lilly, but I'd assume that can also be made > to work with PM if not already working. > >>> I suggest you add some omap3 tests in general as otherwise you are >>> only testing a subset of the driver features and completely missing >>> things like rutnime PM and save and restore for the deeper idle >>> states. >> >> yeah, I'll do those tests and re-post the series. > > Thanks! > > Tony > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html