[RFC PATCH] ARM: dts: rockchip: Add wifi support for firefly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch enable wifi support for the firefly board.
Card answer to me that support from 2.0V but regulator is connected
to 1.8V, so voltage capability is wrong. In order to avoid this
we just defined a fixed regulator trigger by the wifi enable gpio
that report 2.0V.

Signed-off-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/rk3288-firefly.dtsi | 43 +++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 0b42372..fcf234e 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -116,6 +116,28 @@
 		vin-supply = <&vcc_io>;
 	};
 
+	io_domains: io-domains {
+		compatible = "rockchip,rk3288-io-voltage-domain";
+		rockchip,grf = <&grf>;
+
+		wifi-supply = <&vcc_18>;
+		audio-supply = <&vcca_33>;
+	};
+
+	vcc_wifi: wifi-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdio0_pwr>;
+		regulator-name = "vcc_wifi";
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <2000000>;
+		startup-delay-us = <100000>;
+		regulator-always-on;
+		vin-supply = <&vcc_io>;
+	};
+
 	vcc_flash: flash-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_flash";
@@ -437,13 +459,30 @@
 &sdio0 {
 	broken-cd;
 	bus-width = <4>;
+	clock-freq-min-max = <400000 50000000>;
 	disable-wp;
 	non-removable;
+	cap-sd-highspeed;
 	num-slots = <1>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
-	vmmc-supply = <&vcc_18>;
+	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
+
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+	cap-sdio-irq;
+
+	vmmc-supply = <&vcc_wifi>;
 	status = "okay";
+
+	brcmf: bcrmf@0 {
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio4>;
+		reg = <0>;
+		interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+		status = "okay";
+	};
 };
 
 &sdmmc {
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux