Hi,
On 2014/11/27 06:46, Doug Anderson wrote:
> Hi,
>
> On Tue, Nov 25, 2014 at 12:10 AM, Addy Ke <addy.ke@xxxxxxxxxxxxxx> wrote:
>> This patch add a new quirk to add a s/w timer to notify the driver
>> to terminate current transfer and report a data timeout to the core,
>> if DTO interrupt does NOT come within the given time.
>>
>> dw_mmc call mmc_request_done func to finish transfer depends on
>> DTO interrupt. If DTO interrupt does not come in sending data state,
>> the current transfer will be blocked.
>>
>> But this case really exists, when driver reads tuning data from
>> card on RK3288-pink2 board. I measured waveforms by oscilloscope
>> and found that card clock was always on and data lines were always
>> holded high level in sending data state.
>>
>> We got the reply from synopsys:
>> There are two counters but both use the same value of [31:8] bits.
>> Data timeout counter doesn't wait for stop clock and you should get
>> DRTO even when the clock is not stopped.
>> Host Starvation timeout counter is triggered with stop clock condition.
>>
>> This means that host should get DRTO and DTO interrupt.
>>
>> But we really don't get any data-related interrupt in RK3X SoCs.
>> And driver can't get data transfer state, it can do nothing but wait for.
>
> Have you asked someone on your IC team to confirm this is an SoC
> errata on your SoC? ...or is there something else we could be doing
> wrong (overclocking? jitter in the clock? bad dividers?) that could
> be causing this problem?
>
>
>> #ifdef CONFIG_OF
>> static struct dw_mci_of_quirks {
>> char *quirk;
>> @@ -2513,6 +2549,9 @@ static struct dw_mci_of_quirks {
>> }, {
>> .quirk = "disable-wp",
>> .id = DW_MCI_QUIRK_NO_WRITE_PROTECT,
>> + }, {
>> + .quirk = "broken-dto",
>> + .id = DW_MCI_QUIRK_BROKEN_DTO,
>
> You're adding a device tree property without any binding. If you need
> to add this please send a patch before this one modifying the device
> tree bindings.
>
> ...but that brings up the question: do you _really_ need to add a
> property? You already know that all rk3288 SoCs need this and you
> already know that you're an rk3288 SoC. Just add this quirk in the
> rk3288 code always and be done with it. ...and if this is also needed
> on other Rockchip parts, add it there too.
>
> -Doug
We don't know why we have this problem,
but this problem is really exist, and we need patch to fix this problem now.
I will post a follow up change when we find the root cause.
And there is a little probability of this problem on RK SoC, such as RK3188, RK3066,
when worse card inserted in.
Maybe the other SoCs have the similar problem.
So I will add this quirk in rockchip code(dw_mmc-rockchip.c) as follows:
static int dw_mci_rockchip_parse_dt(struct dw_mci *host)
{
host->quirk |= DW_MCI_QUIRK_BROKEN_DTO;
return 0;
}
......
.parse_dt = dw_mci_rockchip_parse_dt,
......
is right?
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
