This fixes below sparse warning:
drivers/mmc/host/sdhci-pxav3.c:227:10: warning: Initializer entry defined twice
drivers/mmc/host/sdhci-pxav3.c:232:10: also defined here
by removing duplicate initialization of .set_uhs_signaling in
struct sdhci_ops. Also does away with duplcated function.
Cc: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Cc: Chris Ball <chris@xxxxxxxxxx>
Cc: linux-mmc@xxxxxxxxxxxxxxx
Signed-off-by: Pramod Gurav <pramod.gurav@xxxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-pxav3.c | 37 -------------------------------------
1 file changed, 37 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 6f842fb..fd93e60 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -186,45 +186,8 @@ static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
pxa->power_mode = power_mode;
}
-static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
-{
- u16 ctrl_2;
-
- /*
- * Set V18_EN -- UHS modes do not work without this.
- * does not change signaling voltage
- */
- ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-
- /* Select Bus Speed Mode for host */
- ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
- switch (uhs) {
- case MMC_TIMING_UHS_SDR12:
- ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
- break;
- case MMC_TIMING_UHS_SDR25:
- ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
- break;
- case MMC_TIMING_UHS_SDR50:
- ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180;
- break;
- case MMC_TIMING_UHS_SDR104:
- ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
- break;
- case MMC_TIMING_UHS_DDR50:
- ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
- break;
- }
-
- sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
- dev_dbg(mmc_dev(host->mmc),
- "%s uhs = %d, ctrl_2 = %04X\n",
- __func__, uhs, ctrl_2);
-}
-
static const struct sdhci_ops pxav3_sdhci_ops = {
.set_clock = sdhci_set_clock,
- .set_uhs_signaling = pxav3_set_uhs_signaling,
.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.set_bus_width = sdhci_set_bus_width,
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
