On 16 July 2014 00:45, Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> wrote: > Even though some implementations support 4-bytes data register access, > the tmio driver never configures the hardware in such a way and always > performs 2-bytes accesses. Hardcode the DMA transfer size to 2 bytes. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> Thanks! Applied for next. Kind regards Uffe > --- > drivers/mmc/host/tmio_mmc_dma.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c > index 03e7b28..eb8f1d5 100644 > --- a/drivers/mmc/host/tmio_mmc_dma.c > +++ b/drivers/mmc/host/tmio_mmc_dma.c > @@ -294,6 +294,7 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat > cfg.slave_id = pdata->dma->slave_id_tx; > cfg.direction = DMA_MEM_TO_DEV; > cfg.dst_addr = res->start + (CTL_SD_DATA_PORT << host->pdata->bus_shift); > + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; > cfg.src_addr = 0; > ret = dmaengine_slave_config(host->chan_tx, &cfg); > if (ret < 0) > @@ -312,6 +313,7 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat > cfg.slave_id = pdata->dma->slave_id_rx; > cfg.direction = DMA_DEV_TO_MEM; > cfg.src_addr = cfg.dst_addr; > + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; > cfg.dst_addr = 0; > ret = dmaengine_slave_config(host->chan_rx, &cfg); > if (ret < 0) > -- > 1.8.5.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
