Even though some implementations support 4-bytes data register access, the tmio driver never configures the hardware in such a way and always performs 2-bytes accesses. Hardcode the DMA transfer size to 2 bytes. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> --- drivers/mmc/host/tmio_mmc_dma.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c index 03e7b28..eb8f1d5 100644 --- a/drivers/mmc/host/tmio_mmc_dma.c +++ b/drivers/mmc/host/tmio_mmc_dma.c @@ -294,6 +294,7 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat cfg.slave_id = pdata->dma->slave_id_tx; cfg.direction = DMA_MEM_TO_DEV; cfg.dst_addr = res->start + (CTL_SD_DATA_PORT << host->pdata->bus_shift); + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; cfg.src_addr = 0; ret = dmaengine_slave_config(host->chan_tx, &cfg); if (ret < 0) @@ -312,6 +313,7 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat cfg.slave_id = pdata->dma->slave_id_rx; cfg.direction = DMA_DEV_TO_MEM; cfg.src_addr = cfg.dst_addr; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; cfg.dst_addr = 0; ret = dmaengine_slave_config(host->chan_rx, &cfg); if (ret < 0) -- 1.8.5.5 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
