In case of a read operation both MCI_CMDRESPEND and MCI_DATAEND can be set in the status register when entering the interrupt handler. This is due to that the card start sending data before the host has acknowledged the command response. To resolve the issue for this scenario, we must start by handling the CMD irq instead of the DATA irq. The reason is beacuse the completion of the DATA irq will not respect the current command and then causing it to be garbled. Cc: Russell King <linux@xxxxxxxxxxxxxxxx> Cc: Johan Rudholm <jrudholm@xxxxxxxxx> Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> --- drivers/mmc/host/mmci.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index f320579..1a4b153 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1144,16 +1144,17 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status); + cmd = host->cmd; + if (status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|MCI_CMDSENT| + MCI_CMDRESPEND) && cmd) + mmci_cmd_irq(host, cmd, status); + data = host->data; if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR| MCI_TXUNDERRUN|MCI_RXOVERRUN|MCI_DATAEND| MCI_DATABLOCKEND) && data) mmci_data_irq(host, data, status); - cmd = host->cmd; - if (status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|MCI_CMDSENT|MCI_CMDRESPEND) && cmd) - mmci_cmd_irq(host, cmd, status); - ret = 1; } while (status); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
