This enables access the actual_clock via sys. root@imx6qsabreauto:~# cat /sys/kernel/debug/mmc0/ios clock: 198000000 Hz actual clock: 198000000 Hz vdd: 17 (2.9 ~ 3.0 V) bus mode: 2 (push-pull) chip select: 0 (don't care) power mode: 2 (on) bus width: 2 (4 bits) timing spec: 6 (sd uhs SDR104) signal voltage: 0 (1.80 V) Signed-off-by: Dong Aisheng <b29396@xxxxxxxxxxxxx> --- drivers/mmc/host/sdhci-esdhc.h | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h index c8a773b..eb22e5f 100644 --- a/drivers/mmc/host/sdhci-esdhc.h +++ b/drivers/mmc/host/sdhci-esdhc.h @@ -89,8 +89,9 @@ static inline void esdhc_set_clock(struct sdhci_host *host, unsigned int clock, while (host_clock / pre_div / div > clock && div < 16) div++; + host->mmc->actual_clock = host_clock / pre_div / div; dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n", - clock, host_clock / pre_div / div); + clock, host->mmc->actual_clock); pre_div >>= 1; div--; -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
