This patch series add SD3.0 support for i.MX6Q/DL. Since freescale i.MX6Q/DL uSDHC clock tuning progress is a little different from the standard tuning process defined in host controller spec v3.0. So we add a hook to allow execute platform specific tuning instead of standard host controller tuning. The main difference are: 1) not only generate Buffer Read Ready interrupt when tuning is performing. It generates all other DATA interrupts like the normal data command. 2) SDHCI_CTRL_EXEC_TUNING is not automatically cleared by HW, instead it's controlled by SW. 3) SDHCI_CTRL_TUNED_CLK is not automatically set by HW, it's controlled by SW. 4) the clock delay for every tuning is set by SW. Tested on i.MX6Q Sabreauto board. The series is based on latest Linus tree. Dong Aisheng (8): mmc: sdhci: add hooks for platform specific tuning mmc: sdhci: allow platform access of sdhci_send_command sdhci: sdhci-esdhc-imx: support real clock on and off for imx6q sdhci: sdhci-esdhci-imx: add sd3.0 clock tuning support sdhci: sdhci-esdhc-imx: change pinctrl state according to uhs mode mmc: sdhci-esdhc: correct pre_div for imx6q mmc: sdhci-esdhc: set actual_clock in clock setting ARM: dts: imx6qdl: add uhs pinctrl state for usdhc3 arch/arm/boot/dts/imx6dl.dtsi | 33 +++ arch/arm/boot/dts/imx6q.dtsi | 33 +++ arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 4 +- drivers/mmc/host/sdhci-esdhc-imx.c | 307 ++++++++++++++++++++++++++- drivers/mmc/host/sdhci-esdhc.h | 35 +++- drivers/mmc/host/sdhci.c | 12 +- drivers/mmc/host/sdhci.h | 3 + include/linux/platform_data/mmc-esdhc-imx.h | 4 + 8 files changed, 419 insertions(+), 12 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
