The TMOUT register is initted to 0xffffffff at probe time but isn't initted after suspend/resume. Add an init of this value. No problems were observed without this (it will also get initted in __dw_mci_start_request if there is data to send), but it makes the register dump before and after suspend clean. Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx> Acked-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx> --- Changes in v3: None Changes in v2: None drivers/mmc/host/dw_mmc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index be095b7..d2c5db3 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -2482,6 +2482,9 @@ int dw_mci_resume(struct dw_mci *host) /* Restore the old value at FIFOTH register */ mci_writel(host, FIFOTH, host->fifoth_val); + /* Put in max timeout */ + mci_writel(host, TMOUT, 0xFFFFFFFF); + mci_writel(host, RINTSTS, 0xFFFFFFFF); mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER | SDMMC_INT_TXDR | SDMMC_INT_RXDR | -- 1.8.3 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
