After suspend/resume all of the dw_mmc registers are reset to
defaults. We restore most of them, but specifically don't setup the
clock registers after resume unless we've got a powered card. Things
still work because the core will eventually call set_ios() and we'll
set things up.
There doesn't seem to be any reason that I can see _not_ to set things
up after resume. Restoring this state makes the code easier to reason
about and should help prevent bugs. It also allows us to do a
register dump before and after suspend/resume to confirm that we've
set things up OK.
I examined the state of the dw_mmc instance before and after suspend
after this patch. I had no card inserted in an SD card slot.
Before this patch, differences were:
* CLKDIV (0x08)
* CLKENA (0x10)
* TMOUT (0x14)
* CMD (0x2C) - difference is not important
* CLKSEL (0x9C - exynos specific)
After this patch, only TMOUT was different. I have a separate patch
for that.
Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
---
Changes in v2: None
drivers/mmc/host/dw_mmc.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 7a5ce6a..be095b7 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2499,9 +2499,7 @@ int dw_mci_resume(struct dw_mci *host)
struct dw_mci_slot *slot = host->slot[i];
if (!slot)
continue;
- if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) {
- dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
- }
+ dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
ret = mmc_resume_host(host->slot[i]->mmc);
if (ret < 0)
--
1.8.3
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
