On Wednesday 12 June 2013 08:05 PM, Tony Lindgren wrote:
* Balaji T K <balajitk@xxxxxx> [130606 12:20]:
omap3_pmx_core: padconf register are in two banks 0x48003000 to 0x48002268
and 0x480025c0 to 0x480025f8.
split omap3_pmx_core into 2 banks as register between 0x48002270 and 0x48002564
belongs to type pinctrl-single,bit-per-mux with access to certain bit
fields with bit field mask.
Is this the right patch for the description? THe patch seems to deal with
USB pins.
Also, let's not hog any pins under the pinmux controllers, those make
unloading pinctrl-single impossible which is not nice for distros and
development.
omap3_pmx_core is not continuous, so had to split into two and
updated the only user in second bank (omap3_pmx_core2) which happened to be usb,
CC Roger for USB dynamic pin mux selection.
Instead, the pins should be under mmc1 in omap[345].dtsi files.
Regards,
Tony
Signed-off-by: Balaji T K <balajitk@xxxxxx>
---
arch/arm/boot/dts/omap3-beagle.dts | 28 ++++++++++++++++++++--------
arch/arm/boot/dts/omap3.dtsi | 11 ++++++++++-
2 files changed, 30 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 6eec699..7da9979 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -76,17 +76,11 @@
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
- &hsusbb2_pins
+ &hsusbb2_pins1
>;
- hsusbb2_pins: pinmux_hsusbb2_pins {
+ hsusbb2_pins1: pinmux_hsusbb2_pins1 {
pinctrl-single,pins = <
- 0x5c0 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk OUTPUT */
- 0x5c2 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */
- 0x5c4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */
- 0x5c6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */
- 0x5c8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */
- 0x5cA 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */
0x1a4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat2 INPUT | PULLDOWN */
0x1a6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat3 INPUT | PULLDOWN */
0x1a8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat4 INPUT | PULLDOWN */
@@ -97,6 +91,24 @@
};
};
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusbb2_pins2
+ >;
+
+ hsusbb2_pins2: pinmux_hsusbb2_pins2 {
+ pinctrl-single,pins = <
+ 0x50 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk OUTPUT */
+ 0x52 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */
+ 0x54 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */
+ 0x56 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */
+ 0x58 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */
+ 0x5A 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */
+ >;
+ };
+};
+
&i2c1 {
clock-frequency = <2600000>;
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 82a404d..caaa708 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -95,7 +95,16 @@
omap3_pmx_core: pinmux@48002030 {
compatible = "ti,omap3-padconf", "pinctrl-single";
- reg = <0x48002030 0x05cc>;
+ reg = <0x48002030 0x238>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7f1f>;
+ };
+
+ omap3_pmx_core2: pinmux@480025a0 {
+ compatible = "ti,omap3-padconf", "pinctrl-single";
+ reg = <0x480025a0 0x5c>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,register-width = <16>;
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
