Kyoungil,
Could you resend the following change considering Jaehoon's comment?
- int_data_over -> dto
- use boolean constants(true, false) for dw_mci_read_data_pio argument.
Thanks,
Seungwon Jeon
On Tuesday, January 22, 2013, Jaehoon Chung wrote:
> Hi,
>
> i didn't test with this patch. But it makes sense.
> Just i have minor comment.
>
> Acked-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
>
> On 01/21/2013 09:28 PM, Kyoungil Kim wrote:
> > In dwc manual, the below contents are described.
> > "During end of packet, interrupt is not generated if threshold
> > programming is larger than any remaining data. It is responsibility
> > of host to read remaining bytes on seeing Data Transfer Done
> > interrupt"
> > We also have seen the data cannot be read fully
> > when "sg_miter->length" is less than FIFO size.
> >
> > Signed-off-by: Kyoungil Kim <ki0351.kim@xxxxxxxxxxx>
> > Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
> > ---
> > drivers/mmc/host/dw_mmc.c | 11 +++++++----
> > 1 files changed, 7 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> > index 323c502..064c010 100644
> > --- a/drivers/mmc/host/dw_mmc.c
> > +++ b/drivers/mmc/host/dw_mmc.c
> > @@ -1430,7 +1430,7 @@ static void dw_mci_pull_data(struct dw_mci *host, void *buf, int cnt)
> > host->pull_data(host, buf, cnt);
> > }
> >
> > -static void dw_mci_read_data_pio(struct dw_mci *host)
> > +static void dw_mci_read_data_pio(struct dw_mci *host, bool int_data_over)
> > {
> > struct sg_mapping_iter *sg_miter = &host->sg_miter;
> > void *buf;
> > @@ -1465,7 +1465,10 @@ static void dw_mci_read_data_pio(struct dw_mci *host)
> > sg_miter->consumed = offset;
> > status = mci_readl(host, MINTSTS);
> > mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
> > - } while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/
> > + /* if the RXDR is ready read again */
> > + } while ((status & SDMMC_INT_RXDR) ||
> > + (int_data_over &&
> > + SDMMC_GET_FCNT(mci_readl(host, STATUS))));
> If you can change int_data_over, we can use the one line.
>
> Best Regards,
> Jaehoon Chung
> > data->bytes_xfered += nbytes;
> >
> > if (!remain) {
> > @@ -1597,7 +1600,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
> > smp_wmb();
> > if (host->dir_status == DW_MCI_RECV_STATUS) {
> > if (host->sg != NULL)
> > - dw_mci_read_data_pio(host);
> > + dw_mci_read_data_pio(host, 1);
> > }
> > set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
> > tasklet_schedule(&host->tasklet);
> > @@ -1606,7 +1609,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
> > if (pending & SDMMC_INT_RXDR) {
> > mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
> > if (host->dir_status == DW_MCI_RECV_STATUS && host->sg)
> > - dw_mci_read_data_pio(host);
> > + dw_mci_read_data_pio(host, 0);
> > }
> >
> > if (pending & SDMMC_INT_TXDR) {
> >
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
