[PATCH v2] mmc: dw_mmc: read all data in FIFO after Data transfer over interrupt in pio mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In dwc manual, the below contents are described.
"During end of packet, interrupt is not generated if threshold
programming is larger than any remaining data. It is responsibility
of host to read remaining bytes on seeing Data Transfer Done
interrupt"
We also have seen the data cannot be read fully
when "sg_miter->length" is less than FIFO size.

Signed-off-by: Kyoungil Kim <ki0351.kim@xxxxxxxxxxx>
Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
---
 drivers/mmc/host/dw_mmc.c |   11 +++++++----
 1 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 323c502..064c010 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1430,7 +1430,7 @@ static void dw_mci_pull_data(struct dw_mci *host, void *buf, int cnt)
 	host->pull_data(host, buf, cnt);
 }
 
-static void dw_mci_read_data_pio(struct dw_mci *host)
+static void dw_mci_read_data_pio(struct dw_mci *host, bool int_data_over)
 {
 	struct sg_mapping_iter *sg_miter = &host->sg_miter;
 	void *buf;
@@ -1465,7 +1465,10 @@ static void dw_mci_read_data_pio(struct dw_mci *host)
 		sg_miter->consumed = offset;
 		status = mci_readl(host, MINTSTS);
 		mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
-	} while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/
+	/* if the RXDR is ready read again */
+	} while ((status & SDMMC_INT_RXDR) ||
+			(int_data_over &&
+			 SDMMC_GET_FCNT(mci_readl(host, STATUS))));
 	data->bytes_xfered += nbytes;
 
 	if (!remain) {
@@ -1597,7 +1600,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 			smp_wmb();
 			if (host->dir_status == DW_MCI_RECV_STATUS) {
 				if (host->sg != NULL)
-					dw_mci_read_data_pio(host);
+					dw_mci_read_data_pio(host, 1);
 			}
 			set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
 			tasklet_schedule(&host->tasklet);
@@ -1606,7 +1609,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 		if (pending & SDMMC_INT_RXDR) {
 			mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
 			if (host->dir_status == DW_MCI_RECV_STATUS && host->sg)
-				dw_mci_read_data_pio(host);
+				dw_mci_read_data_pio(host, 0);
 		}
 
 		if (pending & SDMMC_INT_TXDR) {
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux