[PATCH v6 12/14] mmc: sdhci-pxav3: remove set_uhs_signaling function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Kevin Liu <kliu5@xxxxxxxxxxx>

Because sdhci can do the same thing so no need to implement this.

Acked-by:  Zhangfei Gao <zhangfei.gao@xxxxxxxxxxx>
Signed-off-by: Kevin Liu <kliu5@xxxxxxxxxxx>
---
 drivers/mmc/host/sdhci-pxav3.c |   39 ---------------------------------------
 1 files changed, 0 insertions(+), 39 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 60829c9..6aecc91 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -125,44 +125,6 @@ static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
 	pxa->power_mode = power_mode;
 }
 
-static int pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
-{
-	u16 ctrl_2;
-
-	/*
-	 * Set V18_EN -- UHS modes do not work without this.
-	 * does not change signaling voltage
-	 */
-	ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-
-	/* Select Bus Speed Mode for host */
-	ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
-	switch (uhs) {
-	case MMC_TIMING_UHS_SDR12:
-		ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
-		break;
-	case MMC_TIMING_UHS_SDR25:
-		ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
-		break;
-	case MMC_TIMING_UHS_SDR50:
-		ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180;
-		break;
-	case MMC_TIMING_UHS_SDR104:
-		ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
-		break;
-	case MMC_TIMING_UHS_DDR50:
-		ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
-		break;
-	}
-
-	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
-	dev_dbg(mmc_dev(host->mmc),
-		"%s uhs = %d, ctrl_2 = %04X\n",
-		__func__, uhs, ctrl_2);
-
-	return 0;
-}
-
 static u32 pxav3_get_max_clock(struct sdhci_host *host)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -172,7 +134,6 @@ static u32 pxav3_get_max_clock(struct sdhci_host *host)
 
 static struct sdhci_ops pxav3_sdhci_ops = {
 	.platform_reset_exit = pxav3_set_private_registers,
-	.set_uhs_signaling = pxav3_set_uhs_signaling,
 	.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
 	.get_max_clock = pxav3_get_max_clock,
 };
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux