mmc.h defines macros for most frequently used MMC opcodes. Use them instead
of hard-coded numbers.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
---
drivers/mmc/host/tmio_mmc_pio.c | 7 ++++---
1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 410b8cf..2050827 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -36,6 +36,7 @@
#include <linux/mfd/tmio.h>
#include <linux/mmc/cd-gpio.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
#include <linux/mmc/tmio.h>
#include <linux/module.h>
#include <linux/pagemap.h>
@@ -305,8 +306,8 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command
int c = cmd->opcode;
u32 irq_mask = TMIO_MASK_CMD;
- /* Command 12 is handled by hardware */
- if (cmd->opcode == 12 && !cmd->arg) {
+ /* CMD12 is handled by hardware */
+ if (cmd->opcode == MMC_STOP_TRANSMISSION && !cmd->arg) {
sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
return 0;
}
@@ -449,7 +450,7 @@ void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
}
if (stop) {
- if (stop->opcode == 12 && !stop->arg)
+ if (stop->opcode == MMC_STOP_TRANSMISSION && !stop->arg)
sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
else
BUG();
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
