Currently the SDHI glue for the TMIO MMC driver installs dummy .get_cd() and
.set_pwr() callbacks even if the platform didn't supply them. This is not
necessary, since the TMIO MMC driver itself checks for NULL callbacks. This
is also dubious if the platform provides a regulator for SD-card power
switching. It is better to only install those callbacks, if they are really
provided by the platform.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
---
drivers/mmc/host/sh_mobile_sdhi.c | 14 ++++++--------
1 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index d8b167c..42f07fa 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -64,18 +64,14 @@ static void sh_mobile_sdhi_set_pwr(struct platform_device *pdev, int state)
{
struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
- if (p && p->set_pwr)
- p->set_pwr(pdev, state);
+ p->set_pwr(pdev, state);
}
static int sh_mobile_sdhi_get_cd(struct platform_device *pdev)
{
struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
- if (p && p->get_cd)
- return p->get_cd(pdev);
- else
- return -ENOSYS;
+ return p->get_cd(pdev);
}
static int sh_mobile_sdhi_wait_idle(struct tmio_mmc_host *host)
@@ -153,8 +149,10 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
goto eclkget;
}
- mmc_data->set_pwr = sh_mobile_sdhi_set_pwr;
- mmc_data->get_cd = sh_mobile_sdhi_get_cd;
+ if (p->set_pwr)
+ mmc_data->set_pwr = sh_mobile_sdhi_set_pwr;
+ if (p->get_cd)
+ mmc_data->get_cd = sh_mobile_sdhi_get_cd;
mmc_data->clk_enable = sh_mobile_sdhi_clk_enable;
mmc_data->clk_disable = sh_mobile_sdhi_clk_disable;
mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED;
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
