In case of "host->bus_hz < slot->clock", divider value is
miscalculated. And clock divider register value is multiple
of 2. If calculated divider value is odd number, result can
be over-clocking.
Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
---
drivers/mmc/host/dw_mmc.c | 10 ++++++----
1 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index f2f8463..c87745e 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -617,14 +617,16 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot)
u32 div;
if (slot->clock != host->current_speed) {
- if (host->bus_hz % slot->clock)
+ div = host->bus_hz / slot->clock;
+ if (host->bus_hz % slot->clock &&
+ host->bus_hz > slot->clock)
/*
* move the + 1 after the divide to prevent
* over-clocking the card.
*/
- div = ((host->bus_hz / slot->clock) >> 1) + 1;
- else
- div = (host->bus_hz / slot->clock) >> 1;
+ div += 1;
+
+ div = (host->bus_hz != slot->clock) ? DIV_ROUND_UP(div, 2) : 0;
dev_info(&slot->mmc->class_dev,
"Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ"
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
