On Fri, 30 Mar 2012, Sujit Reddy Thumma wrote: > Hi, > > While I was debugging an issue where the sdio function driver panics upon > receiving a spurious interrupt notification which is similar to the one found > on libertas sdio http://permalink.gmane.org/gmane.linux.kernel.mmc/8338 > > I can confirm that my hardware not buggy and is not generating any interrupts > during initialization and CCCR_INTx is all zero's. Irrespective of whatever issue this optimization is uncovering, you should _never_ panic when receiving a spurious interrupt notification. This is just basic hardware driver programming practice to gracefully deal with unexpected hardware state. In this case, you should simply notice that your function has no pending work and just return. You probably know this already but this is still worth mentioning again. > After some analysis, I found that there is a notification of interrupt to > function handler by sdio_irq_thread() even though there is no interrupt. The > sequence is as follows. > > sdio_claim_host(); > > sdio_claim_irq(): > ... > sdio_card_irq_get() -> kthread_run(sdio_irq_thread) -> > wake_up_sdio_irq_thread > sdio_single_irq_set() -> card->sdio_single_irq = func = sdio_func[i]; > ... > > sdio_release_host(); > > Since we woke up sdio_irq_thread(), while this thread get a chance to run: > ... > __mmc_claim_host() > process_sdio_pending_irqs() -> since sdio_single_irq is non NULL the > func->handler is directly called without checking pending interrupt bit > CCCR_INTx. > mmc_release_host() > ... > > Irrespective of the function driver state, sdio driver should not call > func->handler() if it is not real interrupt. I knew that function handler > should be able to handle these interrupts gracefully. But it is just not the > right thing for sdio driver to generate spurious interrupts. I agree with you. There is no point calling interrupt handlers spuriously if we can. The patch below should fix that. But that doesn't mean that your driver is not buggy as well. In other words, the patch below is no excuse for you not to fix your code too! ----- >8 Subject: [PATCH] mmc: sdio: avoid spurious calls to interrupt handlers Commit 06e8935feb "optimized SDIO IRQ handling for single irq" introduced some spurious calls to SDIO function interrupt handlers, such as when the SDIO IRQ thread is started, or the safety check performed upon a system resume. Let's add a flag to perform the optimization only when a real interrupt is signaled by the host driver and we know there is no point confirming it. Reported-by: Sujit Reddy Thumma <sthumma@xxxxxxxxxxxxxx> Signed-off-by: Nicolas Pitre <nico@xxxxxxxxxx> Cc: stable@xxxxxxxxxx diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c index f573e7f9f7..3d8ceb4084 100644 --- a/drivers/mmc/core/sdio_irq.c +++ b/drivers/mmc/core/sdio_irq.c @@ -28,18 +28,20 @@ #include "sdio_ops.h" -static int process_sdio_pending_irqs(struct mmc_card *card) +static int process_sdio_pending_irqs(struct mmc_host *host) { + struct mmc_card *card = host->card; int i, ret, count; unsigned char pending; struct sdio_func *func; /* * Optimization, if there is only 1 function interrupt registered - * call irq handler directly + * and we know an IRQ was signaled then call irq handler directly. + * Otherwise do the full probe. */ func = card->sdio_single_irq; - if (func) { + if (func && host->sdio_irq_pending) { func->irq_handler(func); return 1; } @@ -116,7 +118,8 @@ static int sdio_irq_thread(void *_host) ret = __mmc_claim_host(host, &host->sdio_irq_thread_abort); if (ret) break; - ret = process_sdio_pending_irqs(host->card); + ret = process_sdio_pending_irqs(host); + host->sdio_irq_pending = false; mmc_release_host(host); /* diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index ee2b0363c0..557aa4cd66 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -323,6 +323,7 @@ struct mmc_host { unsigned int sdio_irqs; struct task_struct *sdio_irq_thread; + bool sdio_irq_pending; atomic_t sdio_irq_thread_abort; mmc_pm_flag_t pm_flags; /* requested pm features */ @@ -378,6 +379,7 @@ extern int mmc_cache_ctrl(struct mmc_host *, u8); static inline void mmc_signal_sdio_irq(struct mmc_host *host) { host->ops->enable_sdio_irq(host, 0); + host->sdio_irq_pending = true; wake_up_process(host->sdio_irq_thread); } -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
