When UHS-I card is detected also print the bus speed mode
in which UHS-I card will be running.
Signed-off-by: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
---
drivers/mmc/core/bus.c | 17 +++++++++++++++--
1 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 5d011a3..3f60606 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -267,6 +267,15 @@ int mmc_add_card(struct mmc_card *card)
{
int ret;
const char *type;
+ const char *uhs_bus_speed_mode = "";
+ static const char *const uhs_speeds[] = {
+ [UHS_SDR12_BUS_SPEED] = "SDR12 ",
+ [UHS_SDR25_BUS_SPEED] = "SDR25 ",
+ [UHS_SDR50_BUS_SPEED] = "SDR50 ",
+ [UHS_SDR104_BUS_SPEED] = "SDR104 ",
+ [UHS_DDR50_BUS_SPEED] = "DDR50 ",
+ };
+
dev_set_name(&card->dev, "%s:%04x", mmc_hostname(card->host), card->rca);
@@ -296,6 +305,10 @@ int mmc_add_card(struct mmc_card *card)
break;
}
+ if (mmc_sd_card_uhs(card) &&
+ (card->sd_bus_speed < ARRAY_SIZE(uhs_speeds)))
+ uhs_bus_speed_mode = uhs_speeds[card->sd_bus_speed];
+
if (mmc_host_is_spi(card->host)) {
pr_info("%s: new %s%s%s card on SPI\n",
mmc_hostname(card->host),
@@ -303,13 +316,13 @@ int mmc_add_card(struct mmc_card *card)
mmc_card_ddr_mode(card) ? "DDR " : "",
type);
} else {
- pr_info("%s: new %s%s%s%s card at address %04x\n",
+ pr_info("%s: new %s%s%s%s%s card at address %04x\n",
mmc_hostname(card->host),
mmc_card_uhs(card) ? "ultra high speed " :
(mmc_card_highspeed(card) ? "high speed " : ""),
(mmc_card_hs200(card) ? "HS200 " : ""),
mmc_card_ddr_mode(card) ? "DDR " : "",
- type, card->rca);
+ uhs_bus_speed_mode, type, card->rca);
}
#ifdef CONFIG_DEBUG_FS
--
1.7.1.1
--
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
