From: Hyeonsu Kim <hyeonsu.kim@xxxxxxxxxxx>
Why need to set EVENT_DATA_COMPLETE bit in here?
I think this is duplication bit-set.
because The bit is already set when occur SDMMC_INT_DATA_OVER interrupt.
In my case (I use dw_mmc for sd card), the bit brings about data transfer fault.
So I want to know your idea about the bit-set.
Signed-off-by: Hyeonsu Kim <hyeonsu.kim@xxxxxxxxxxx>
---
drivers/mmc/host/dw_mmc.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 0e34279..edc60d1 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1550,7 +1550,6 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI);
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
- set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
host->dma_ops->complete(host);
}
#endif
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
