From: Jerry Huang <Chang-Ming.Huang@xxxxxxxxxxxxx> When access the card on some FSL platform board (e.g p2020, p1010, mpc8536), the following error is reported with the timeout value calculated: mmc0: Got data interrupt 0x00000020 even though no data operation was in progress. mmc0: Got data interrupt 0x00000020 even though no data operation was in progress. So we skip the calculation of timeout and use the max value to fix it. Signed-off-by: Gao Guanhua <B22826@xxxxxxxxxxxxx> Signed-off-by: Xie Xiaobo <X.Xie@xxxxxxxxxxxxx> Signed-off-by: Jerry Huang <Chang-Ming.Huang@xxxxxxxxxxxxx> CC: Chris Ball <cjb@xxxxxxxxxx> --- changes for v2: - change the property to compatible for quirks drivers/mmc/host/sdhci-pltfm.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-) diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c index ba36c36..1c254b1 100644 --- a/drivers/mmc/host/sdhci-pltfm.c +++ b/drivers/mmc/host/sdhci-pltfm.c @@ -74,6 +74,11 @@ void sdhci_get_of_property(struct platform_device *pdev) if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc")) host->quirks |= SDHCI_QUIRK_BROKEN_DMA; + if (of_device_is_compatible(np, "fsl,p2020-esdhc") + || of_device_is_compatible(np, "fsl,p1010-esdhc") + || of_device_is_compatible(np, "fsl,mpc8536-esdhc")) + host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + clk = of_get_property(np, "clock-frequency", &size); if (clk && size == sizeof(*clk) && *clk) pltfm_host->clock = be32_to_cpup(clk); -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
