On Wed, Nov 16, 2011 at 4:38 PM, Shashidhar Hiremath <shashidharh@xxxxxxxxxxxxxxx> wrote: > The patch provides An infrastructure to test commands other than Read/Write commands using the IOCTL interface.The Patch can be useful incase of validating the device to verify whether device support a given command or not. The result of the sent command will be written to the result element of the mmc_ioc_cmd structure passed through IOCTL interface. > > Signed-off-by: Shashidhar Hiremath <shashidharh@xxxxxxxxxxxxxxx> > --- > drivers/mmc/card/Makefile | 2 +- > drivers/mmc/card/block.c | 28 ++ > drivers/mmc/card/test_cmds.c | 743 ++++++++++++++++++++++++++++++++++++++++++ > drivers/mmc/card/test_cmds.h | 53 +++ > drivers/mmc/core/core.c | 4 + > drivers/mmc/core/mmc.c | 4 + > drivers/mmc/core/mmc_ops.c | 1 + > drivers/mmc/core/sd.c | 2 + > include/linux/mmc/ioctl.h | 1 + > 9 files changed, 837 insertions(+), 1 deletions(-) > create mode 100644 drivers/mmc/card/test_cmds.c > create mode 100644 drivers/mmc/card/test_cmds.h > > diff --git a/drivers/mmc/card/Makefile b/drivers/mmc/card/Makefile > index c73b406..ea52ee1 100644 > --- a/drivers/mmc/card/Makefile > +++ b/drivers/mmc/card/Makefile > @@ -3,7 +3,7 @@ > # > > obj-$(CONFIG_MMC_BLOCK) += mmc_block.o > -mmc_block-objs := block.o queue.o > +mmc_block-objs := block.o queue.o test_cmds.o Why should it be included by default ? I think it belongs under CONFIG_MMC_TEST > obj-$(CONFIG_MMC_TEST) += mmc_test.o > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html