Re: [PATCH] mmc : general purpose partition support.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2011/9/24 J Freyensee <james_p_freyensee@xxxxxxxxxxxxxxx>:
> On 09/22/2011 05:29 PM, NamJae Jeon wrote:
>>
>> 2011/9/23 J Freyensee<james_p_freyensee@xxxxxxxxxxxxxxx>
>>>
>>> On 09/22/2011 04:58 PM, NamJae Jeon wrote:
>>>>
>>>> 2011/9/23 J Freyensee<james_p_freyensee@xxxxxxxxxxxxxxx>:
>>>>>
>>>>> On 09/22/2011 04:15 PM, NamJae Jeon wrote:
>>>>>>
>>>>>> 2011/9/23 J Freyensee<james_p_freyensee@xxxxxxxxxxxxxxx>:
>>>>>>>
>>>>>>> On 09/22/2011 08:34 AM, Namjae Jeon wrote:
>>>>>>>>
>>>>>>>> It allows general purpose parition in MMC Device. If it is enable,
>>>>>>>> it
>>>>>>>> will
>>>>>>>> make mmcblk0gp1,gp2,gp3,gp4 partition like this.
>>>>>>>>
>>>>>>>>> cat /proc/paritition
>>>>>>>>
>>>>>>>>       179 0 847872 mmcblk0
>>>>>>>>       179 192 4096 mmcblk0gp4
>>>>>>>>       179 160 4096 mmcblk0gp3
>>>>>>>>       179 128 4096 mmcblk0gp2
>>>>>>>>       179 96  1052672 mmcblk0gp1
>>>>>>>>       179 64  1024 mmcblk0boot1
>>>>>>>>       179 32  1024 mmcblk0boot0
>>>>>>>>
>>>>>>>> Signed-off-by: Namjae Jeon<linkinjeon@xxxxxxxxx>
>>>>>>>> ---
>>>>>>>>  drivers/mmc/card/block.c |   36
>>>>>>>> ++++++++++++++++++++++++++++++++++++
>>>>>>>>  drivers/mmc/core/mmc.c   |   42
>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++
>>>>>>>>  include/linux/mmc/card.h |    4 ++++
>>>>>>>>  include/linux/mmc/mmc.h  |    4 ++++
>>>>>>>>  4 files changed, 86 insertions(+), 0 deletions(-)
>>>>>>>>
>>>>>>>> diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
>>>>>>>> index 9b90726..074ec55 100644
>>>>>>>> --- a/drivers/mmc/card/block.c
>>>>>>>> +++ b/drivers/mmc/card/block.c
>>>>>>>> @@ -1402,6 +1402,42 @@ static int mmc_blk_alloc_parts(struct
>>>>>>>> mmc_card
>>>>>>>> *card, struct mmc_blk_data *md)
>>>>>>>>                        return ret;
>>>>>>>>        }
>>>>>>>>
>>>>>>>> +       if (card->ext_csd.gp1_size) {
>
> Looks like you may need to also incorporate the ideas Adrian Hunter did in a
> patch that seems similar to yours, mainly also checking
> mmc_boot_partition_access(card->host) in your if() statement?
>
> I attached his patch that was sent today.
>
> Jay
I checked attached patch, see the patch v2. I think that adrian may
modify his patch base on my patch.
Thanks

>>>>>>>>
>>>>>>>> +               ret = mmc_blk_alloc_part(card, md,
>>>>>>>> EXT_CSD_PART_CONFIG_ACC_GP1,
>>>>>>>> +                                       card->ext_csd.gp1_size>>
>>>>>>>>    9,
>>>>>>>> +                                       false,
>>>>>>>> +                                       "gp1");
>>>>>>>> +               if (ret)
>>>>>>>> +                       return ret;
>>>>>>>> +       }
>>>>>>>> +
>>>>>>>
>>>>>>> if mmc_blk_alloc_part() fails for 'if (card->ext_csd.pt1_size)', why
>>>>>>> would
>>>>>>> you want to give this code the opportunity to call
>>>>>>> mmc_blk_alloc_part()
>>>>>>> again with the next if() below?  If mmc_blk_alloc_part() fails, is it
>>>>>>> a
>>>>>>> big
>>>>>>> problem, like kzalloc() failing?  If so, I would think you would want
>>>>>>> to
>>>>>>> immediately quit this function and report an error (either use errno
>>>>>>> value
>>>>>>> or pass the value of ret).
>>>>>>
>>>>>> ->      if card->ext_csd.gp1_size is no zero, it means general purpose
>>>>>> partition is enable.
>>>>>> and it can set up to 4 partition in specification. so we should check
>>>>>> it by next if().
>>>>>
>>>>> Please document that in your code.  Please add a function header to
>>>>> this
>>>>> function.
>>>>
>>>> I will add comments at this code.  I don't understand why a function
>>>> header should be added yet.
>>>
>>> One or the other.
>>>
>>> but a function comment header should be added at some point.  Yes, the
>>> mmc subsystem is pretty legacy, but any new work that gets added to the
>>> kernel is usually has higher standards for stuff like not just adding
>>> function header comments but putting them in a certain format...at least
>>> this is what I went through when I had things accepted upstream.
>>
>> Okay, I will release patch v2 after adding function header comments again.
>> Thanks for your review.
>>>
>>>>
>>>>>
>>>>>>
>>>>>>>
>>>>>>>> +       if (card->ext_csd.gp2_size) {
>>>>>>>> +               ret = mmc_blk_alloc_part(card, md,
>>>>>>>> EXT_CSD_PART_CONFIG_ACC_GP2,
>>>>>>>> +                                       card->ext_csd.gp2_size>>
>>>>>>>>    9,
>>>>>>>> +                                       false,
>>>>>>>> +                                       "gp2");
>>>>>>>> +               if (ret)
>>>>>>>> +                       return ret;
>>>>>>>> +       }
>>>>>>>> +
>>>>>>>> +       if (card->ext_csd.gp3_size) {
>>>>>>>> +               ret = mmc_blk_alloc_part(card, md,
>>>>>>>> EXT_CSD_PART_CONFIG_ACC_GP3,
>>>>>>>> +                                       card->ext_csd.gp3_size>>
>>>>>>>>    9,
>>>>>>>> +                                       false,
>>>>>>>> +                                       "gp3");
>>>>>>>> +               if (ret)
>>>>>>>> +                       return ret;
>>>>>>>> +       }
>>>>>>>> +
>>>>>>>> +       if (card->ext_csd.gp4_size) {
>>>>>>>> +               ret = mmc_blk_alloc_part(card, md,
>>>>>>>> EXT_CSD_PART_CONFIG_ACC_GP4,
>>>>>>>> +                                       card->ext_csd.gp4_size>>
>>>>>>>>    9,
>>>>>>>> +                                       false,
>>>>>>>> +                                       "gp4");
>>>>>>>> +               if (ret)
>>>>>>>> +                       return ret;
>>>>>>>> +       }
>>>>>>>> +
>>>>>>>>        return ret;
>>>>>>>>  }
>>>>>>>>
>>>>>>>> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
>>>>>>>> index 10f5a19..cc31511 100644
>>>>>>>> --- a/drivers/mmc/core/mmc.c
>>>>>>>> +++ b/drivers/mmc/core/mmc.c
>>>>>>>> @@ -393,6 +393,48 @@ static int mmc_read_ext_csd(struct mmc_card
>>>>>>>> *card,
>>>>>>>> u8
>>>>>>>> *ext_csd)
>>>>>>>>                        card->ext_csd.enhanced_area_offset = -EINVAL;
>>>>>>>>                        card->ext_csd.enhanced_area_size = -EINVAL;
>>>>>>>>                }
>>>>>>>> +
>>>>>>>> +               /*
>>>>>>>> +                * General purpose partition Support
>>>>>>>> +                */
>>>>>>>> +
>>>>>>>> +               if (ext_csd[EXT_CSD_PARTITION_SUPPORT]&        0x1)
>>>>>>>> {
>>>>>>>> +
>>>>>>>> +                       u8 hc_erase_grp_sz =
>>>>>>>> +                               ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
>>>>>>>> +                       u8 hc_wp_grp_sz =
>>>>>>>> +                               ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
>>>>>>>> +
>>>>>>>> +                       card->ext_csd.enhanced_area_en = 1;
>>>>>>>> +
>>>>>>>> +                       card->ext_csd.gp1_size =
>>>>>>>> +                               (ext_csd[145]<<        16) +
>>>>>>>> (ext_csd[144]<<
>>>>>>>>    8)
>>>>>>>> +
>>>>>>>> +                               ext_csd[143];
>>>>>>>> +                       card->ext_csd.gp1_size *=
>>>>>>>> +                               (size_t)(hc_erase_grp_sz *
>>>>>>>> hc_wp_grp_sz);
>>>>>>>> +                       card->ext_csd.gp1_size<<= 19;
>>>>>>>> +
>>>>>>>> +                       card->ext_csd.gp2_size =
>>>>>>>> +                               (ext_csd[148]<<        16) +
>>>>>>>> (ext_csd[147]<<
>>>>>>>>    8)
>>>>>>>> +
>>>>>>>> +                               ext_csd[146];
>>>>>>>> +                       card->ext_csd.gp2_size *=
>>>>>>>> +                               (size_t)(hc_erase_grp_sz *
>>>>>>>> hc_wp_grp_sz);
>>>>>>>> +                               card->ext_csd.gp2_size<<= 19;
>>>>>>>> +
>>>>>>>> +                       card->ext_csd.gp3_size =
>>>>>>>> +                               (ext_csd[151]<<        16) +
>>>>>>>> (ext_csd[150]<<
>>>>>>>>    8)
>>>>>>>> +
>>>>>>>> +                               ext_csd[149];
>>>>>>>> +                       card->ext_csd.gp3_size *=
>>>>>>>> +                               (size_t)(hc_erase_grp_sz *
>>>>>>>> hc_wp_grp_sz);
>>>>>>>> +                       card->ext_csd.gp3_size<<= 19;
>>>>>>>> +
>>>>>>>> +                       card->ext_csd.gp4_size =
>>>>>>>> +                               (ext_csd[154]<<        16) +
>>>>>>>> (ext_csd[153]<<
>>>>>>>>    8)
>>>>>>>> +
>>>>>>>> +                               ext_csd[152];
>>>>>>>> +                       card->ext_csd.gp4_size *=
>>>>>>>> +                               (size_t)(hc_erase_grp_sz *
>>>>>>>> hc_wp_grp_sz);
>>>>>>>> +                       card->ext_csd.gp4_size<<= 19;
>>>>>>>> +               }
>>>>>>>>                card->ext_csd.sec_trim_mult =
>>>>>>>>                        ext_csd[EXT_CSD_SEC_TRIM_MULT];
>>>>>>>>                card->ext_csd.sec_erase_mult =
>>>>>>>> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
>>>>>>>> index b460fc2..96a98a7 100644
>>>>>>>> --- a/include/linux/mmc/card.h
>>>>>>>> +++ b/include/linux/mmc/card.h
>>>>>>>> @@ -64,6 +64,10 @@ struct mmc_ext_csd {
>>>>>>>>        unsigned long long      enhanced_area_offset;   /* Units:
>>>>>>>> Byte */
>>>>>>>>        unsigned int            enhanced_area_size;     /* Units: KB
>>>>>>>> */
>>>>>>>>        unsigned int            boot_size;              /* in bytes
>>>>>>>> */
>>>>>>>> +       unsigned int            gp1_size;               /* in bytes
>>>>>>>> */
>>>>>>>> +       unsigned int            gp2_size;               /* in bytes
>>>>>>>> */
>>>>>>>> +       unsigned int            gp3_size;               /* in bytes
>>>>>>>> */
>>>>>>>> +       unsigned int            gp4_size;               /* in bytes
>>>>>>>> */
>>>>>>>>        u8                      raw_partition_support;  /* 160 */
>>>>>>>>        u8                      raw_erased_mem_count;   /* 181 */
>>>>>>>>        u8                      raw_ext_csd_structure;  /* 194 */
>>>>>>>> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
>>>>>>>> index 5a794cb..380720a 100644
>>>>>>>> --- a/include/linux/mmc/mmc.h
>>>>>>>> +++ b/include/linux/mmc/mmc.h
>>>>>>>> @@ -303,6 +303,10 @@ struct _mmc_csd {
>>>>>>>>  #define EXT_CSD_PART_CONFIG_ACC_MASK  (0x7)
>>>>>>>>  #define EXT_CSD_PART_CONFIG_ACC_BOOT0 (0x1)
>>>>>>>>  #define EXT_CSD_PART_CONFIG_ACC_BOOT1 (0x2)
>>>>>>>> +#define EXT_CSD_PART_CONFIG_ACC_GP1    (0x4)
>>>>>>>> +#define EXT_CSD_PART_CONFIG_ACC_GP2    (0x5)
>>>>>>>> +#define EXT_CSD_PART_CONFIG_ACC_GP3    (0x6)
>>>>>>>> +#define EXT_CSD_PART_CONFIG_ACC_GP4    (0x7)
>>>>>>>>
>>>>>>>>  #define EXT_CSD_CMD_SET_NORMAL                (1<<0)
>>>>>>>>  #define EXT_CSD_CMD_SET_SECURE                (1<<1)
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> J (James/Jay) Freyensee
>>>>>>> Storage Technology Group
>>>>>>> Intel Corporation
>>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> J (James/Jay) Freyensee
>>>>> Storage Technology Group
>>>>> Intel Corporation
>>>>>
>>>
>>>
>>> --
>>> J (James/Jay) Freyensee
>>> Storage Technology Group
>>> Intel Corporation
>>
>> N�����r��y���b�X��ǧv�^�)޺{.n�+����{��g"��^n�r��z� ��h����&�� �G���h�
>> (�階�ݢj"�� � m�����z�ޖ���f���h���~�mml==
>
>
> --
> J (James/Jay) Freyensee
> Storage Technology Group
> Intel Corporation
>
��.n��������+%������w��{.n�����{��i��)��jg��������ݢj����G�������j:+v���w�m������w�������h�����٥



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux