On 9 June 2011 19:25, Ohad Ben-Cohen <ohad@xxxxxxxxxx> wrote: > let's update that patch. I'd send you an updated one, but I have to go > for awhile, so here's the quick change you need to do. Unfortunately it doesn't help. New patch: http://dev.laptop.org/~dsd/20110609/sd-pwr-debug6.patch During resume, this happens: [ 152.156215] mmc1: new SDIO card at address 0001 [ 152.198193] mmc_power_save_host mmc1 [ 152.212397] mmc_power_restore_host mmc1 [ 152.311567] CMD5 reset failed, err=-110 [ 152.315513] libertas_sdio: probe of mmc1:0001:1 failed with error -16 bash-4.1# cat /sys/kernel/debug/mmc1/ios clock: 400000 Hz vdd: 21 (3.3 ~ 3.4 V) bus mode: 1 (open drain) chip select: 0 (don't care) power mode: 2 (on) bus width: 0 (1 bits) timing spec: 0 (legacy) (I had forgotten to include final ios output in my last test, sorry about that) Full log: http://dev.laptop.org/~dsd/20110609/sd-pwr-debug6.txt What next? Is it concerning that ios ends up running at the wrong frequency and voltage? Daniel -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
