Re: [PATCH 2/2] sdhci-pxa: add call back interface to share sdhci-pxa

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, May 14, 2011 at 1:01 PM, Philip Rakity <prakity@xxxxxxxxxxx> wrote:
>
> On May 13, 2011, at 10:11 PM, zhangfei gao wrote:
>
>> On Fri, May 13, 2011 at 9:47 PM, Chris Ball <cjb@xxxxxxxxxx> wrote:
>>> Hi,
>>>
>>> On Thu, May 12 2011, Philip Rakity wrote:
>>>> All other platform specific code is in the host/ directory.
>>>>
>>>> This moves it to arch/arm
>>>>
>>>> If that is the direction the group wants to go in --> then the patch
>>>> is fine provided the mmc group can review the patches.  Otherwise they
>>>> are handled by the arm maintainer.
>>>
>>> Thanks.  Wolfram, do you have any ideas on what the best design is for
>>> these SoC-specific changes to sdhci-pxa?
>>>
>>> - Chris.
>>
>> The code in arch/arm is
>> 1. Accessing private register, take pxa910 and mmp2 we want to support
>> as example, there are several private registers differece, though they
>> are same ip, with same issues and quirk.
>> 2. Handle platform difference, for example, mmp2 used in two different
>> platform, one use wp pin, the other does not.
>
> The situation is a little more complicated.

The interface is used for long time among mmp2, pxa910 and mmp3.
Also could be used for new controller with minor register difference
but same ip, without adding new specific driver.

>
> pxa168 and pxa910 share (almost) the same IP  The are both based on SD 2.0
> controller spec with extensions.  The pxa910 controller has fixes to the
> pxa168 controller.  They share the same private registers that allow support
> for clock gating and timing adjustments.
>
> mmp2 is based on SD 3.0 spec.  The private register space is different.
>
> mmc/host/Kconfig takes no account of these differences.  mmp2 and pxa168/910
> cannot co-exist.   What is currently submitted does not work.  One cannot
> compile mmp2 and pxa910  nor would they work if one could.
>
> Mark Brown and I submitted patches to fix this.  We added code to the host/ directory
> that took into account these differences.   It provided a common interface layer
> that then used platform specific code in the host/ directory to handle the different
> behavior.
>
> Arng Bergmann provided advice and reviewed the patches to allow explicit selection of the
> pxa familty controller and board.  Based on this comments we submitted a patch
> to allow selection if the appropriate SoC.
>
> These are two approaches.
>
>>
>> Thanks
>>> --
>>> Chris Ball   <cjb@xxxxxxxxxx>   <http://printf.net/>
>>> One Laptop Per Child
>>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux