Hi Chris. Chris Ball wrote: > Hi Andrei, > > On Mon, Apr 11 2011, Andrei Warkentin wrote: >> Allows device MMC boot partitions to be accessed. MMC partitions >> are treated effectively as separate block devices on the same >> MMC card. > > Booted this with a Sandisk SEM04G eMMC: > > [ 2.469921] mmcblk0boot0: mmc2:0001 SEM04G partition 1 1.00 MiB > [ 2.475905] mmcblk0boot1: mmc2:0001 SEM04G partition 2 1.00 MiB > [ 2.489403] mmcblk0boot1: unknown partition table > [ 2.495921] mmcblk0boot0: unknown partition table > > I haven't set up any boot partitions explicitly, so I guess the two 1MiB > boot partitions might be the factory-default setting. Out of curiosity, > does that match your experience with Sandisk eMMCs? in my experience, Sandisk set up boot partition with each 1MiB. (default setting) Regards, Jaehoon Chung > > - Chris. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
